[1] Suryanarayana, C. and Al-Aqeeli, N., “Mechanically Alloyed Nano Composites,” Progress in Materials Science, Vol. 58, pp. 383- 502, 2012.
[2] Xiong, Z. Shao, G. Shi, X. Duan, X. and Yan, L., “Ultrafine Hardmetals Prepared by WC–10 wt.%Co Composite Powder,” International Journal of Refractory Metals and Hard Materials, Vol. 26, No. 3, pp. 242-250, 2008.
[3] Konyashin, I. Hlawatschek, S. Ries, B. Lachmann, F. and Vukovic, M., “Cobalt Capping on WC–Co Hard Metals. Part II: A Technology for Fabrication of Co Coated Articles During Sintering,” International Journal of Refractory Metals and Hard Materials, Vol. 42, pp. 136-141, 2014.
[4] Mandel, K. Radajewski, M. and Kruger, L., “Strain-Rate Dependence of the Compressive Strength of WC–Co Hard Metals,” Materials Science and Engineering: A, Vol. 612, pp. 115-122, 2014.
[5] Hassanzadeh-Tabrizi, S.A. Davoodi, D. Beykzadeh, A.A. and Chami, A., “Fast Synthesis of VC and V2C Nanopowders by the Mechanochemical Combustion Method,” International Journal of Refractory Metals & Hard Materials, Vol. 51, pp. 1-5, 2015.
[6] Torabi, O. Ebrahimi-Kahrizsangi, R. Golabgir, M.H. Tajizadegan, H. and Jamshidi, A., “Reaction Chemistry in the Mg–B2O3–MoO3 System Reactive Mixtures,” International Journal of Refractory Metals & Hard Materials, No. 48, pp. 102-107, 2014.
[7] Ebrahimi-Kahrizsangi, R. Kalani-Mahabadi, M. and Torabi, O., “An Investigation on the Mechanochemical Behavior of the Ca–C–Cu2O–WO3 Quaternary System to Synthesize the Cu–WC Nanocomposite Powder,” International Journal of Refractory Metals and Hard Materials, Vol. 54, pp.75-81, 2016.
[8] Suryanarayana, C. and Ivanov, E., “Mechanochemical Synthesis of Nanocrystalline Metal Powders,” Advances in Powder Metallurgy, pp. 42-68, 2013.
[9] Balaz, P., “Mechanochemistry in Nanoscience and Minerals Engineering,” 1st ed. Germany: Springer Berlin Heidelberg; 2008.
[10] Bowden, F. and Yoffe, A., “Initiation and Growth of Explosion in Liquids and Solids,” Cambridge University Press, Cambridge, 1985.
[11] Thiessen, K.P., “On the Origin of Increased Activity in Mechanochemistry of Solids,” Journal De Chimie Physique, Vol. 83, No. 11-12, pp.717-724, 1986.
[12] Hu, H. Chen, Q. Yin, Z. Zhang, P. Zou, J. and Che, H., “Study on Kinetics of Thermal Decomposition of Mechanically Activated Pyrites,” Thermochimi. Acta., Vol. 389, pp.79-83, 2002.
[13] Nakayama, K. and Nevshupa, R.A., “Plasma Generation in a Gap around a Sliding Contact”, Journal of Physics D: Applied Physics, Vol. 35, pp. 53-56, 2002.
[14] Heegn, H., “On the Connection between Ultrafine Grinding and Mechanical Activation of Minerals,” Aufbereitungs-Technik, Vol. 30, pp. 635–642, 1989.
[15] Heinicke, G., “Recent Advances in Tribochemistry,” In: Proceedings of the International Symposium on Powder Technology, Kyoto, Vol. 81, pp. 354–364, 1981.
[16] Hassanzadeh-Tabrizi, S.A. Davoodi, D. Beykzadeh, A.A. and Salahshour, S., “Fast Mechanochemical Combustion Synthesis of Nanostructured Vanadium Boride by a Magnesiothermic Reaction,” Ceramics Internatinal, Vol. 42, pp. 1812-1816, 2016.
[17] Hosseini, S.N. Karimzadeh, F. and Enayati, M.H., “Mechanochemical Synthesis of Al2O3/Co Nanocomposite by Aluminothermic Reaction,” Journal of Advanced Powder Technology, Vol. 23, pp. 334- 337, 2012.
[18] Davoodi, D. Hassanzadeh-Tabrizi, S.A., Emami, A.H. and Salahshour, S., “A Low Temperature Mechanochemical Synthesis of Nanostructured ZrC Powder by a Magnesiothermic Reaction,” Ceramics International, Vol. 41, No. 7, pp. 8397-8401, 2015.
[19] Whlliamson, G.K. and Hall, W.H., “X-Ray Broadening from Field Aluminium and Wolfram”, Acta Metallurgica, Vol. 1, pp. 22-31, 1953.
[20] Kubaschewski, O. Alcock, C.B. and Spencer, P.J., “Materials Thermochemistry,” Pergamon Press, Oxford, 1993.
[21] Xu, J. Zou, B. Zhao, S. Hui, Y. Huang, W. Zhou, X. Wang, Y. Cai, X. and Cao, X., “Fabrication and Properties of ZrC–ZrB2/Ni Cermet Coatings on a Magnesium Alloy by Atmospheric Plasma Spraying of SHS Powders,” Ceramics International, Vol. 40, No. 10, pp. 15537-15544, 2014.
[22] Takacs, L., "Self-Sustaining Reactions Induced by Ball Milling”, Progress Materials Science; Vol. 47, No. 4, pp. 355–414, 2002.
[23] Bilgi, E. Çamurlu, H.E. Akgün, B. Topkaya, Y.A. and Sevinc, N., “Formation of TiB2 by Volume Combustion and Mechanochemical Process,” Materials Research Bulletin; Vol. 43, No.4, pp. 873–881, 2007.
[24] Barıs Akgün H., Erdem Çamurlu Y.T. and Naci S., “Mechanochemical and Volume Combustion Synthesis of ZrB2,” International Journal of Refractory Metals and Hard Materials, Vol. 29, No. 5, pp. 601–607, 2011.