[1] Sachdeva, D. Tiwari, S. Sundarraj, S. and Luo, A., “Microstructure and Corrosion Characterization of Squeeze Cast AM50 Magnesium Alloys,” Metall. Mater. Trans. B, Vol. 41, No. 6, pp. 1375–1383, 2010.
[2] Papis, K. J. M. Löffler, J. F. and Uggowitzer, P. J., “Interface Formation Between Liquid and Solid Mg Alloys—An Approach to Continuously Metallurgic Joining of Magnesium Parts,” Mater. Sci. Eng. A, Vol. 527, No. 9, pp. 2274–2279. 2010.
[3] Zhang, T. Meng, G. Shao, Y. Cui, Z. and Wang, F., “Corrosion of Hot Extrusion AZ91 Magnesium Alloy. Part II: Effect of Rare Earth Element Neodymium (Nd) on the Corrosion Behavior of Extruded Alloy,” Corros. Sci., Vol. 53, No. 9, pp. 2934–2942. 2011.
[4] Papis, K. J. M. Loeffler, J. F. and Uggowitzer, P. J., “Light Metal Compound Casting,” Sci. China Ser. E Technol. Sci., Vol. 52, No. 1, pp. 46–51, 2009.
[5] Sato, Y. S. C. Park, S. H. Michiuchi, M. and Kokawa, H.,“Constitutional Liquation During Dissimilar Friction Stir Welding of Al and Mg Alloys,” Scr. Mater., Vol. 50, No. 9, pp. 1233–1236, 2004.
[6] Dietrich, D. Nickel, D. Krause, M. Lampke, T. Coleman, M. P. and Randle, V., “Formation of Intermetallic Phases in Diffusion-Welded Joints of Aluminium and Magnesium alloys,” J. Mater. Sci., Vol. 46, No. 2, pp. 357–364, 2010.
[7] Bhamji, I. Preuss, M. Moat, R. J. Threadgill, P. L. and Addison, C., “Linear Friction Welding of Aluminium to Magnesium,” Sci. Technol. Weld. Join., Vol. 17, No. 5, pp. 368–374, 2012.
[8] Liu, L. Wang, H. and Zhang, Z., “The Analysis of Laser Weld Bonding of Al Alloy to Mg Alloy,” Scr. Mater., Vol. 56, pp. 473–476, 2007.
[9] Liu, P. Li, Y. Geng, H. and Wang, J., “Microstructure Characteristics in TIG Welded Joint of Mg/Al Dissimilar Materials,” Mater. Lett., Vol. 61, No. 6, pp. 1288–1291, 2007.
[10] Hajjari, E. Divandari, M. Razavi, S. H. Emami, S. M. Homma, T. and Kamado, S., “Dissimilar Joining of Al/Mg Light Metals by Compound Casting Process,” J. Mater. Sci., Vol. 46, No. 20, pp. 6491–6499, 2011.
[11] Hoeschl, M. Wagener, W. and Wolf, J., “BMW’s Magnesium-Aluminium Composite Crankcase, State-of-the-Art Light Metal Casting and Manufacturing,” No. 724, 2006.
[12] Papis, K. J. M. Hallstedt, B. Loffler, J. F. and Uggowitzer, P. J., “Interface Formation in Aluminium–Aluminium Compound Casting,” Acta Mater., Vol. 56, No. 13, pp. 3036–3043, 2008.
[13] Emami, S. M. Divandari, M. Arabi, H. and Hajjari, E., “Effect of Melt-to-Solid Insert Volume Ratio on Mg/Al Dissimilar Metals Bonding,” J. Mater. Eng. Perform., Vol. 22, No. 1, pp. 123–130, 2012.
[14] Hajjari, E. Divandari, M. Razavi, S. H. Homma, T. and Kamado, S., “Microstructure Characteristics and Mechanical Properties of Al 413/Mg Joint in Compound Casting Process,” Metall. Mater. Trans. A, Vol. 43, No. 12, pp. 4667–4677, 2012.
[15] Xu, G. Luo, A. A. Chen, Y. and Sachdev, A. K., “Interfacial Phenomena in Magnesium/Aluminum Bi-metallic Castings,” Mater. Sci. Eng. A, Vol. 595, pp. 154–158, 2014.
[16] Sarvari, M. and Divandari, M., “Melt Behavior and Shrinkage Force Effect of Al Melt in Al / Mg Bimetal Cast via Centrifugal Casting,”, In Persian, Modares Mech. Eng., Vol. 15, No. 7, pp. 131–138, 2015.
[17] Sarvari, M. and Divandari, M., “Melt-Solid-Gas Behavior in the Interface of Al / Mg Composite Produced by Centrifugal Casting”, In Persian, Journal of Science and Technology of Composites, Vol. 2, No. 3, pp. 75–82, 2015.
[18] Firouzdor, V. and Kou, S., “Al-to-Cu Friction Stir Lap Welding,” Metall. Mater. Trans. A, Vol. 43, No. 1, pp. 303–315, 2011.
[19] Rübner, M. Gunzl, M. Körner, C. and Singer, R. F., “Aluminium–Aluminium Compound Fabrication by High Pressure Die Casting,” Mater. Sci. Eng. A, Vol. 528, No. 22–23, pp. 7024–7029, 2011.
[20] Beeley, P., Foundry Technology, Second Edi. Butterworth-Heinemann, 2001.
[21] Divandari, M. and Campbell, J., “Oxide Film Characteristics of Al–7Si–Mg Alloy in Dynamic Conditions in Casting,” Int. J. Cast Met. Res., Vol. 17, No. 3, pp. 182–187, 2004.
[22] “Reaction-Web, Fact-Web Programs.” [Online]. Available: http://www.crct.polymtl.ca/.
[23] Bauer, A. F., “Method of Bonding a Bimetallic Casting,” 749017, 1958.
[24] Avedesian, M. M., Magnesium and Magnesium Alloys (Asm Specialty Handbook) (Asm Specialty Handbook). ASM International; Illustrated Edition, 1999.
[25] Davis, J. R., “Aluminum and Aluminum Alloys,” ASM Spec. Handbook, ASM Int. Mater. Park, 1993.
[26] Graney, C.M., “Coriolis Effect, Two Centuries Before Coriolis,” Phys. Today, Vol. 64, No. 8, pp. 8, 2011.
[27] Esmaeil, H., “The Study of Effective Factors on Bonding of Al/Mg Interface in Compound Casting Process,” In persion, PhD Thesis, Iran University of Science and Technology, 2012.
[28] Wang, J. Yajiang ,L. and Wanqun, H., “Interface Microstructure and Diffision Kinetics in Diffusion Bonded Mg/Al Joint,” Akadémiai Kiadó, Budapest Springer, Dordr., Vol. 95, No. 1, pp. 71–79, 2008.