[1] Kant,T. and Swaminathan.K, “Estimation of Transverse/Interlaminar Stresses in Laminated Composites-a Selective Review and Survey of Current Developments,” Composite Struct, Vol. 49, pp. 65-75, 2000.
[2] Pipes, R.B. and Pagano, N.J., “Interlaminar Stresses in Composite Laminates under Uniform Axial Extension,” J. Compos. Mater, Vol. 4, pp. 538-548, 1970.
[3] Pipes, R.B. and Pagano, N.J., “Interlaminar Stresses in Composite Laminates- an approximate Elasticity Solution,” Journal of Applied .Mechanics, Vol. 4, pp. 668-672, 1974.
[4] Pipes,R.B. and Daniel Moire, I.M., “Analysis of the Interlaminar Shear Edge Effect in Laminated Composites,” J. Compos. Mater, Vol. 5, pp. 255-59, 1971.
[5] Tang, S. and Levy, A., “A boundary layer theory-part II: Extension of Laminated Finite Strip,” J. Compos. Mater, Vol. 9, pp. 42-52, 1975.
[6] Hsu, P.W., and Herakovich, C.T., “Edge effects in angle-ply composite laminate,” J. Compos. Mater, Vol. 11, pp. 422-28, 1977.
[7] Wang, S.S. and Choi, I., “Boundary-Layer Effects in Composite Laminates. Part I: Free-edge Stress Singularities,” ASME J. Appl. Mech, Vol. 49, pp. 541-548, 1982.
[8] Wang, S.S. and Choi, I., “Boundary-Layer Effects in Composite Laminates, Part II: Free-edge Stress Solutions and Basic Characteristics,” ASME J. Appl. Mech, Vol. 53, pp.744-750, 1986.
[9] A.S.D. Wang, F.W. Crossman, “Some New Results on Edge Effect in Symmetric Composite Laminates,” J. Compos. Mater, Vol. 11, pp. 92-106, 1977.
[10] Wang, A.S.D. and Crossman, F.W., “Edge Effects on Thermally Induced Stresses in Composite Laminates,” J. Compos. Mater, Vol. 11, pp. 300-312, 1977.
[11] Whitcomb, J.D. and Raju, I.S. and Goree, J.G., “Reliability of the Finite Element Method for Calculating Free Edge Stresses in Composite Laminates,” Comput Struct, Vol. 15, No. 1, pp.23-37, 1982.
[12] Murthy, P.L.N., and Chamis, C.C., “Free-edge Delamination: Laminate Width and Loading Conditions Effects,” J Comp Technol Res, Vol. 11 No. 1, pp. 15-22, 1989.
[13] Cho, M. and Kim , H.S., “Iterative Free-Edge Stress Analysis of Composite Laminates under Extension, Bending, Twisting and Thermal Loadings,” Int J Solids Struct, Vol. 37, No. 3, pp. 435-59, 2000.
[14] Shu, X.P. and Soldators, KP, “Cylindrical Bending of Angle-Ply Laminates Subjected to Different Sets of Edge Boundary Conditions,” Int J Solids and Struct, Vol. 37, pp.4285-4307, 2000.
[15] Nosier, A. and Bahrami , A. “Interlaminar Stresses in Antisymmetric Angle-Ply laminates,” Composite Struct. Vol. 78, pp.18-33, 2007.
[16] Sarvestani, H. Y. and Sarvestani, M. Y., “Interlaminar Stress Analysis of General Composit Laminates,” International Journal of Mechanical Sciences, Vol. 53, pp. 958-967, 2011
[17] Kapoor, H. and Kapania, R.K., S.R. Soni, “Interlaminar Stress Calculation in Composite and Sandwich Plates in NURBS Isogeometric Finite Element Analysis,” Compos Struct, Vol.107, pp.537-548, 2013
[18] J. Seok Ahn, K.-Sung Woo, “Interlaminar Stress Distribution of Laminated Composites Using the Mixed-Dimensional Transition Element,” J compos Mater, Vol. 48, pp. 3-20, 2014
[19] Yazdani , M. and Rezghi , M. and Khalili Lanji, M.R. and Moomivand , B., “Analysis of Free Edge Stresses in a Cross-Ply Composite Plate by Applying Shooting Method,” In Persian, Modaress Mech Eng, Vol. 13, No. 9, pp. 1-11, 2013
[20] Afshin M. and Taheri-Behrooz,
F., “Interlaminar Stresses of Laminated Composite Beams Resting on Elastic Foundation Subjected to Transverse Loading,” Computational Materials Science, Vol.96, pp. 439–447, 2015
[21] Ren, J.G., “Exact Solution for Laminated Cylindrical Shell in Cylindrical Bending,” Composite science and Technology, Vol. 29, pp. 168-187, 1987.
[22] Chaudhuri, R.A., “On the Prediction of Interlaminar Stresses in a Thick Laminated General Shell,” Int. J. Solids Struct, Vol. 26, No. 5-6, pp. 499-510, 1990.
[23] Kant, T. and Menon, M.P., “Estimation of Interlaminar Stresses in Fiber Reinforced Composite Cylindrical Shells,” Computers & Structures, Vol. 38, No. 2, pp.131-147, 1991.
[24] Jing, H.G. and Tzeng, K.G., “Elasticity Solution for Laminated Anisotropic Cylindrical Panels in Cylindrical Bending,” Composite Structures, Vol. 30, No.3, pp.307-317, 1995.
[25] Boitnot, R.L. and Starnes, J.H.Jr. and Johnson, E.R., “Nonlinear Response and Failure of Pressurized Composite Curved Panels,” Journal of Aerospace Engineering, Vol. 8, No. 3, pp.129-138, 1995.
[26] Shu, X.P., “A Refined Theory of Laminated Shells with Higher-Order Transverse Shear Deformation,” Int. J. Solids Struct, Vol. 34, No. 6, pp.673-683, 1997.
[27] Jing, H. and Tzeng ,K., “Analysis of Thick Laminated Anisotropic Cylindrical Shells Using a Refined Shell Theory,” Int. J. Solids Struct, Vol. 32, No. 10, pp. 1459-1476, 1995.
[28] Carrera, E., “Multilayered Shell Theories Accounting for Layerwise Mixed Description,” Part1: AIAA Journal, Vol. 37, No. 9, pp. 1117-1124, 1999.
[29] Hossain, S.J., “A Finite Element Formulation for the Analysis of Laminated Composite Shells,” Comput. Struct, Vol. 82, No. 20–21, pp. 1623–1638, 2004.
[30] Tanov, R. and Tabiei , A., “Adding Transverse Normal Stresses to Layered Shell Finite Elements for the Analysis of Composite Structures,” Composite Struct, Vol. 76, No. 4, pp. 338–344, 2006.
[31] Afshin, M. and Sadighi , M. and Shakeri ,M., “Free Edge Effects in a Cylindrical Sandwich Panel with a Flexible Core and Laminated Composite Face Sheets,” Mechanics of Composite Materials, Vol. 46, No. 5, pp.787-808, 2010.
[32] Mahmoudabadi, M.R., Ovesy H.R. and Fazilati J., “Dynamic Instability Analysis of Composite Cylindrical Panels Using the First Order Shear Deformation Layerwise Theory and Spline Finite Strip Method, ” In Persian, Journal of Science and Ttechnology of Composites, Vol. 1, pp. 61-74, 2014.
[33] Reddy, J. N., “Energy Principles and Variational Methods in Applied Mechanics,” Jhon Wiley & Sons, 2002
[34] Even Barbero, J., “Finite Element Analysis of Composite Materials Using Abaqus,” CRC Press, pp.102, 2013
)