[1]
J. Betten, Creep Mechanics, 2nd edition, Springer Press, Berlin Heidelberg, New York, 2005.
|
[2]
|
V. Birman,L. W. Byrd, “Modeling and analysis of functionally graded materials and structures”, Journal of Transaction of the ASME,60, 195-216, 2007.
|
[3]
|
A. M. Wahl, G. O. Sankey, M. J. Manjoine and E. Shoemaker, “Creep test of rotating discs at elevated temperature and comparisons with theory”, Journal of Applied Mechanics, 21, 225-235, 1954.
|
[4]
|
B. M. Ma, “A creep analysis of rotating solid discs”, Journal of the Franklin Institute, 267,157-168, 1959.
|
[5]
|
B. M. Ma, “Creep analysis of rotating solid discs with variable thickness and temperature”, Journal of the Franklin Institute, 270,40-54, 1961.
|
[6]
|
B. M. Ma, “A power-function creep analysis for rotating solid discs having variable thickness and temperature”, Journal of the Franklin Institute, 277,593-612, 1964.
|
[7]
|
V. K. Arya and N. S. Bhatnagar, “Creep analysis of rotating orthotropic discs”, International Journal ofNuclear Engineering and Design, 55, 323-330, 1979.
|
[8]
|
N. S. Bhatnagar, P. S. Kulkarni and V. K. Arya, “Steady state creep of orthotropic rotating discs of variable thickness”, International Journal ofNuclear Engineering and Design, 91, 121-141, 1986.
|
[9]
|
D. D. Deivedi, V. K. Gupta and A. K. Dham, “Investigating the effect of thickness profile of a rotating functionally graded disc on its creep behavior”, Journal of Thermoplastic Composite Materials, 26(4), 461-475, 2011.
|
[10]
|
V. Vandana and S. B. Singh, “Modeling anisotropy and steady state creep in a rotating disc of Al-SiC having varying thickness”, International journal of scientific & engineering research, 2(10), 1-12, 2011.
|
[11]
|
S. B. Singh and S. Ray, “Steady-state creep behavior in an isotropic functionally graded material rotating disc of Al-SiC composite”, Journal of Metallurgical and Materials Transactions, 32A,1679-1685, 2001.
|
[12]
|
S. B. Singh and S. Ray, “Modeling the anisotropy and creep in orthotropic Al-SiC composite rotating disc”, International Journal of Mechanics of Materials, 34(6),363-372, 2002.
|
[13]
|
S. B. Singh and S. Ray, “Newly proposed yield criteria for residual stress and steady state creep in an anisotropic rotating composite disc”, Journal of Materials Processing Technology,143, 623-628, 2003.
|
[14]
|
H. Jahed and J. Bidabady, “An axisymmetric method of creep analysis for primary and secondary creep”, International Journal of Pressure Vessels and Piping, 80, 597-606, 2003.
|
[15]
|
V. K. Gupta, S. B. Singh, H. N. Chandrawat and S. Ray, “Creep behavior of a rotating functionally graded composite disc operating under thermal gradients”, Journal of Metallurgical and Material Transactions, 35A, 1381-1391, 2004.
|
[16]
|
V. Gupta and S. B. Singh, “Mathematical model of creep behavior in an anisotropic rotating disc of Al-SiC with thickness variation in presence of thermal residual stress”, International Journal of Mechanical engineering and technology, 3, 274-283, 2012.
|
[17]
|
Y. Terada and T. Sato, “Relationship between minimum creep rate and rupture life for a Die-Cast Mg-Al-Mn alloy”, Journal of Materials transactions, 49, 439-442, 2008.
|
[18]
|
A. Ghorbanpour Arani, A. A. Mosallaie Barzoki, R. Kolahchi, M. R. Mozdianfard and A. Loghman, “Semi-analytical solution of time-dependent electro-thermo-mechanical creep for radially polarized piezoelectric cylinder”, Journal of Computers and Structures,89, 1494-1502, 2011.
|
[19]
|
F. Vakili-Tahami, M. Zehsaz and A. M. AlizadeFard, Multi-objective optimum design of an FG Al-SiC rotating disc with temperature dependent properties based on creep behavior, Modares MechanicalEngineering, Vol. 14, No. 12, pp. 23-34, 2013. (In Persian)
|
[20]
|
V. K. Gupta, S. B. Singh, H. N. Chandrawat and S. Ray, “Steady state creep and material parameters in a rotating disc of Al-SiC composite”, European Journal of Mechanics-A/Solids, 23, 335-344, 2004.
|
[21]
|
V. K. Gupta, V. Kumar, S. Ray, “Modeling creep in a rotating disc with linear and quadratic composition gradient”, International Journal for Computer-Aided Engineering and Software, 26, 400-421, 2009.
|
[22]
|
A. B. Pandey, R. S. Mishra, Y. R. Mahajan, “Steady state creep behavior of silicon carbide particulate reinforced aluminum composites”, Acta Metallurgica et Materialia, 40, 2045-2082, 1992.
|
[23]
|
M. Rattan, N. Chamoli and S. B. Singh, “Creep analysis of an isotropic functionally graded rotating disc”, International Journal of Contemporary Mathematical Sciences, 5, 419-431, 2010.
|