[1]
T. Børvik, M. Langseth, O. Hopperstad, K. Malo, Ballistic penetration of steel plates, International Journal of Impact Engineering, Vol. 22, No. 9, pp. 855-886, 1999.
|
|
[2]
|
N. Gupta, V. Madhu, Normal and oblique impact of a kinetic energy projectile on mild steel plates, International journal of impact engineering, Vol. 12, No. 3, pp. 333-343, 1992.
|
|
[3]
|
D. L. Littlefield, C. E. Anderson Jr, Y. Partom, S. J. Bless, The penetration of steel targets finite in radial extent, International journal of impact engineering, Vol. 19, No. 1, pp. 49-62, 1997.
|
|
[4]
|
B. Sorensen, K. Kimsey, G. Silsby, D. Scheffler, T. Sherrick, W. De Rosset, High velocity penetration of steel targets, International Journal of Impact Engineering, Vol. 11, No. 1, pp. 107-119, 1991.
|
|
[5]
|
A. Tasdemirci, I. Hall, Numerical and experimental studies of damage generation in multi-layer composite materials at high strain rates, International journal of impact engineering, Vol. 34, No. 2, pp. 189-204, 2007.
|
|
[6]
|
Y. Gupta, J. Ding, Impact load spreading in layered materials and structures: concept and quantitative measure, International Journal of Impact Engineering, Vol. 27, No. 3, pp. 277-291, 2002.
|
|
[7]
|
W. A. Gooch, B. Chen, M. Burkins, R. Palicka, J. J. Rubin, R. Ravichandran, Development and ballistic testing of a functionally gradient ceramic/metal applique, in Proceeding of, Trans Tech Publ, pp. 614-621.
|
|
[8]
|
J. López-Puente, A. Arias, R. Zaera, C. Navarro, The effect of the thickness of the adhesive layer on the ballistic limit of ceramic/metal armours. An experimental and numerical study, International journal of impact engineering, Vol. 32, No. 1, pp. 321-336, 2005.
|
|
[9]
|
B. Roeder, C. Sun, Dynamic penetration of alumina/aluminum laminates: experiments and modeling, International journal of impact engineering, Vol. 25, No. 2, pp. 169-185, 2001.
|
|
[10]
|
Z. Zuoguang, W. Mingchao, S. Shuncheng, L. Min, S. Zhijie, Influence of panel/back thickness on impact damage behavior of alumina/aluminum armors, Journal of the European Ceramic Society, Vol. 30, No. 4, pp. 875-887, 2010.
|
|
[11]
|
R. Mines, A one-dimensional stress wave analysis of a lightweight composite armour, Composite structures, Vol. 64, No. 1, pp. 55-62, 2004.
|
|
[12]
|
B. Gama, Study of through-thickness wave propagation in multi-layer hybrid lightweight armor, in Proceeding of, 1998.
|
|
[13]
|
D. Hui, P. K. Dutta, A new concept of shock mitigation by impedance-graded materials, Composites Part B: Engineering, Vol. 42, No. 8, pp. 2181-2184, 2011.
|
|
[14]
|
J. O. Hallquist, LS-DYNA keyword user’s manual, Livermore Software Technology Corporation, 2007.
|
|
[15]
|
D. Zhu, S. Yan, B. Li, Single-grit modeling and simulation of crack initiation and propagation in SiC grinding using maximum undeformed chip thickness, Computational Materials Science, Vol. 92, pp. 13-21, 2014.
|
|
[16]
|
M. Takaffoli, M. Papini, Numerical simulation of solid particle impacts on Al6061-T6 Part II: Materials removal mechanisms for impact of multiple angular particles, Wear, Vol. 296, No. 1, pp. 648-655, 2012.
|
|
[17]
|
H. Espinosa, S. Dwivedi, P. Zavattieri, G. Yuan, A numerical investigation of penetration in multilayered material/structure systems, International journal of solids and structures, Vol. 35, No. 22, pp. 2975-3001, 1998.
|
|
[18]
|
A. Dorogoy, D. Rittel, A. Brill, A study of inclined impact in polymethylmethacrylate plates, International Journal of Impact Engineering, Vol. 37, No. 3, pp. 285-294, 2010.
|
|
[19]
|
J. Robbins, J. Ding, Y. Gupta, Load spreading and penetration resistance of layered structures—a numerical study, International journal of impact engineering, Vol. 30, No. 6, pp. 593-615, 2004.
|
|
[20]
|
K. Spranghers, I. Vasilakos, D. Lecompte, H. Sol, J. Vantomme, Full-field deformation measurements of aluminum plates under free air blast loading, Experimental mechanics, Vol. 52, No. 9, pp. 1371-1384, 2012.
|
|
[21]
|
P. J. Shull, Nondestructive evaluation: theory, techniques, and applications: CRC press, 2002.
|
|
[22]
|
J. M. L. R. Rajendran, Blast loaded plates, Elsevier, 2008.
|
|
[23]
|
G. Nurick, G. Shave, The deformation and tearing of thin square plates subjected to impulsive loads—an experimental study, International Journal of Impact Engineering, Vol. 18, No. 1, pp. 99-116, 1996.
|
|
[24]
|
M. Lee, Y. Yoo, Analysis of ceramic/metal armour systems, International Journal of Impact Engineering, Vol. 25, No. 9, pp. 819-829, 2001.
|
|
[25]
|
Y. Wang, F. Wang, X. Yu, Z. Ma, J. Gao, X. Kang, Effect of interlayer on stress wave propagation in CMC/RHA multi-layered structure, Composites Science and Technology, Vol. 70, No. 12, pp. 1669-1673, 2010.
|
|
[26]
|
Y. Wyser, C. Pelletier, J. Lange, Predicting and determining the bending stiffness of thin films and laminates, Packaging Technology and Science, Vol. 14, No. 3, pp. 97-108, 2001.
|
)