[1]
Hoseini, S. A. V., Pol, M. H., “Investigation of the tensile and the flexural properties of the glass/epoxy composites reinforced with nanoclay particles”, Modares Mechanical Engineering, Vol. 14, No. 7, pp. 103-108, 2014. (In Persian)
|
|
[2]
|
Beheshty, M. H. and Heidary, A.R. “Science and Technology of Prepregs”, Iran Journal Polymer Science and Technology, Vol. 4, No. 1, pp. 34-47, 1991. (In Persian)
|
|
[3]
|
Mazumdar, S. K., “Composites manufacturing : materials, product, and process engineering”, pp. 58-59, USA :CRC Press LLC, 2000.
|
|
[4]
|
Vafayan, M. Beheshty, M. H. Ghoreishy, M. H. R. Abedini, H., “Advanced integral isoconversional analysis for evaluating and predicting the kinetic parameters of the curing reaction of epoxy prepreg”, Thermochimica Acta, Vol. 557, pp. 37-43, 2013.
|
|
[5]
|
Hayes, B. S. Seferis, J. C., “Simulation Engineering of Polymeric Prepreg Composite Systems”, PhD Thesis, University of Washington, Washington, 1997.
|
|
[6]
|
prepreg, http://www.hexcel.com, available in March 2005
|
|
[7]
|
Shaghaghi, S. Beheshty, M. H. Rahimi, H., “Preparation and Rheological Characterization of Phenolic/Glass Prepregs”, Iran Polymer Journal, Vol. 20, No. 12, pp. 969-977, 2011.
|
|
[8]
|
Shaghaghi, S. Beheshty, M. H. Rahimi, H. “Preparation of phenolic-glass prepregs andinvestigation the effect of phenolic resin type on their properties”, MSc Thesis, Iran Polymer and Petrochemical Institute, Tehran, 2010. (In Persian)
|
|
[9]
|
Jubslip, C. Punson, K. Takeichi, T. Rimdusit, S., “Curing Kinetics of Benzoxazine- Epoxy Copolymer Investigated by non-Isothermal Differential Scanning Calorimetry”, Polymer Degradation and Stability, Vol. 95, pp. 918-924, 2010.
|
|
[10]
|
Sun, L. Pang, S. Sterling, A. M. Negulescu, I. I. Stubblefield, M. A., “Dynamic Modeling of Curing Process of Epoxy Prepreg”, Journal of applied polymer science, Vol. 86, pp. 1911-1923, 2002.
|
|
[11]
|
Hayaty, M. Beheshty, M. H. Esfandeh, M., “Cure Kinetics of a Glass/Epoxy Prepreg by Dynamic Differential Scanning Calorimetry”, Journal of applied polymer science, Vol. 120, pp. 62-69, 2011.
|
|
[12]
|
Sabzevari, S. M. Alavi-Soltani, S. Minaie, B., “New Method for Estimating the Extent of Curing of Thermosetting Prepregs”, Journal of applied polymer science, Vol. 121, pp. 883-891, 2011.
|
|
[13]
|
Wang, Q. Storm, B. K. Houmoller, L. P., “Study of the Isothermal Curing of an Epoxy Prepreg by Near-Infrared Spectroscopy”, Journal of applied polymer science, Vol. 87, pp. 2295-2305, 2003.
|
|
[14]
|
Zhang, J. Xu, Y.C. Huang, P., “Effect of Cure Cycle on Curing Process and Hardness for Epoxy Resin”, Express Polymer Letters, Vol. 3, No. 9, pp. 534-541, 2009.
|
|
[15]
|
Blest, D. C. Duffy, B. R. Mckee, S. Zulkifle, A. K., “Curing Simulation of Thermoset Composites”, Composite: Part A, Vol. 30, pp. 1289-1309, 1999.
|
|
[16]
|
Ghoreishy, M. H. R, Rafei, M. Bakhshandeh, G. R. Nasiri, M., “Computer Simulation of Cure Process of an Axisymmetric Rubber Article Reinforced by Metal Plates Using Extended Abaqus Code”, Iran Journal Polymer Science and Technology, Vol. 23, No. 2, pp. 121-131, 2010. (In Persian)
|
|
[17]
|
Loos, A. C. Springer, G. S., “Curing of Epoxy Matrix Composites, Composite Materials”, Vol. 17, pp. 135-169, 1983.
|
|
[18]
|
Ghoreishy, M. H. R Naderi, G., “The Three Dimensional Simulation and Development of a Computer Software for Rubber Curing Process by Finite Element Method”, Iran Journal Polymer Science and Technology, Vol. 17, No. 1, pp. 21-28, 2004. (In Persian)
|
|
[19]
|
Behzad, T. Sain, M. “Finite Element Modeling of Polymer Curing in Natural Fiber Reinforced Composites”, Composites Science and Technology, Vol. 67, pp. 1666-1673, 2007.
|
|
[20]
|
Atarsia, A. Boukhili, R., “Relationship Between Isothermal and Dynamic Cure of Thermosets Via the Isoconversion Represention”, polymer Engineering and Sience, Vol. 40, No. 3, pp. 607-620, 2000.
|
|
[21]
|
Kamal, M. R. Sourour, S., “Kinetics and thermal characterization of thermoset cure”, polymer Engineering and Sience, Vol. 13, pp. 59-64, 1973.
|
|
[22]
|
Kamal, M. R. Sourour, S., “Differential Scanning Calorimetry of Epoxy Cure: Isothermal Cure Kinetics”, Thermochimica Acta, Vol. 14, pp. 41-59, 1976.
|
|
[23]
|
Lam, P. W. K. Plaumann, H. P. Tran, T., “An Improved Kinetic Model for the Autocatalytic Curing of Styrene-Based Thermoset Resins”, Journal of applied polymer science, Vol. 41, pp. 3043-3057, 1990.
|
|
[24]
|
|
|
[25]
|
Krug, D. J. Asuncion, M. Z. Popova, V. Laine, R. M., “Transparent Fiber Glass Reinforced Composites”, Composites Science and Technology, Vol. 77, pp. 95-100, 2013.
|
|
[26]
|
Bitzer, T., “Honeycomb technology—materials, design, manufacturing, applications and testing”, pp. 86, London: Chapman and Hall, 1997.
|
|
[27]
|
Ahn, K. J. Seferis, J. C., “Prepreg Process Analysis”, Polymer Composite, Vol. 14, No. 4, pp. 349-360, 1993.
|
)