[1]
Kinloch, J., Adhesion and Adhesives: Science andTechnology, Chapman & Hall, London, 1987.
[2]
Kinloch, A. J, Adhesives in Engineering, Proceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering, Vol. 211(5), 1997, pp.307-335 .
[3]
Mostovoy, S., Crosley, P. B., and Ripling, E. J, Use of Crack Line Loaded Specimens for Measuring Plane Strain Fracture Toughness, J. Mater., Vol. 2, 1967, pp. 661-668.
[4]
Blackman, B., Kinloch, A. J., Paraschi, M., and Teo, W. S. ,Measuring the Mode I Adhesive Fracture Energy, GIC, of structural Adhesive Joints: The Results of an International Round-Robin, Int. J. Adhes. Adhes., Vol. 23(4), 2003, pp. 293-305.
[5]
ASTM D5528-01, Standard Test Method for Mode I Interlaminar Fracture Toughness of Unidirectional Fiber-Reinforced Polymer Matrix Composites, ASTM Standard, 2007, ASTM International, West Conshohocken, PA, 2007.
[6]
Imanaka, M., Motohashi, S., Nishi, K., Nakamura, Y., and Kimoto, M., Crack-Growth Behaviour of Epoxy Adhesives Modified with Liquid Rubber and Cross-Linked Rubber Particles Under Mode I Loading, Int. J. Adhes. Adhes., Vol. 29(1), 2009, pp. 45-55.
[7]
M. Alfano, F. Furgiuele, L. Pagnotta, and G. H. Paulino, Analysis of Fracture in Aluminum Joints Bonded with a Bi-Component Epoxy Adhesive, Journal of Testing and Evaluation, Vol. 39, No. 2.
[8]
Sundaravalli S, Vijayaraghavan G.K. and Majumder M.C., Estimation of required heat input for the evaluation of Disbonds in FMLs Using Thermography, International Conference on Modeling, Optimization and Computing (ICMOC 2010), National Institute of Te.
[9]
Amenabar, A. Mendikute, A. López-Arraiza, M. Lizaranzu, J. Aurrekoetxea, Comparison and analysis of non-destructive testing techniques suitable for delamination inspection in wind turbine blades, Composites Part B: Engineering, Vol. 42, No. 5, pp. 1.
[10]
Yu Y.H., Choi J.H., Kweon J.H., Kim D.H., A study on the failure detection of composite materials using an acoustic emission, Composite Structures, Vol.75, 2006, pp.163-169.
[11]
F. Pashmforoush, M. Fotouhi, M. Ahmadi, Damage Characterization of Glass/Epoxy Composite Under Three-Point Bending Test Using Acoustic Emission Technique, Journal of Materials Engineering and Performance, Vol. 21, No. 7, pp. 1380-1390.
[12]
A. R. Oskouei, A. Zucchelli, M. Ahmadi, G. Minak, An integrated approach based on acoustic emission and mechanical information to evaluate the delamination fracture toughness at mode I in composite laminate, Materials & Design, Vol. 32, No. 3, pp. 1444.
[13]
M. Saeedifar, M. Fotouhi, R. Mohammadi, M. Ahmadi Najafabadi, H. Hosseini Toudeshky, Investigation of delamination and interlaminar fracture toughness assessment of Glass/Epoxy composite by acoustic emission, Modares Mechanicla Engineering, Vol. 14, Issue 4, June 2014 (In Persian)
[14]
ASTM D3433-93, Standard test method for fracture strength in cleavage of adhesives in bonded metal joints, American Society for Testing and Materials, Philadelphia,PA, 1993.
|
[15]
|
A. A. Bakhtiary Davijani, M. Hajikhani, M. Ahmadi, Acoustic Emission based on sentry function to monitor the initiation of delamination in composite materials, Materials & Design, Vol. 32, No. 5, 2011, pp. 3059-3065.
|
|
[16]
|
Alfano, M., Furgiuele, F., Leonardi, A., Maletta, C., and Paulino, G. H., Analysis of Mode I Fracture in Adhesive Joints Using Tailored Cohesive Zone Models, Int. J. Fract., Vol. 157, 2009, pp. 193-204.
|
|
[17]
|
Yuan, H. and Xu, Y., “Computational Fracture Mechanics Assessment of Adhesive Joints,” Comput. Mater. Sci., Vol. 43(1), 2008, pp. 146-156.
|
|
[18]
|
Scheider, I. and Brocks, W,.Cohesive Elements for Thin Walled Structures, Comput. Mater. Sci., Vol. 37,2006 , pp. 101-109.
|
)