[1] Yousefpour, A. Hojjati, M. and Immarigeon, J.-P., “Fusion Bonding/Welding of Thermoplastic Composites,” Journal of Thermoplastic Composite Materials, Vol. 17, No. 4, pp. 303–341, 2004.
[2] Hosseinkhani, M. Haghighi-Yazdi, M. Mousavi-Mashhadi, M. and Safarabadi, M., “Finite element modeling and experimental investigation of the effect of fiber orientation on viscoelastic behavior of composite laminates reinforced with long fibers,” In Persian, Journal of Science and Technology of Composites, Vol. 6, No. 2, pp. 248–254, 2019.
[3] Ozturk, F. Cobanoglu, M. and Ece, R. E., “Recent advancements in thermoplastic composite materials in aerospace industry,” Journal of Thermoplastic Composite Materials, Vol. 0, No. 0, pp. 1–33, 2023.
[4] Ghorbani, H. Golzar, M. and Behravesh, A. H., “Modeling of Impregnation in the Pultrusion of Thermoplastic Composites,” In Persian, Journal of Science and Technology of Composites, vol. 3, no. 1, pp. 31–42, 2016.
[5] Tutunchi, M. Golzar, M. and Behravesh, A. H., “Investigation of thermoplastic pultrusion for tubular product production using prepregs,” In Persian, Journal of Science and Technology of Composites, Vol. 2, No. 1, pp. 23–32, 2015.
[6] Bahrami, B. Ayatollahi, M. R. and Beigrezaee, M. J., “Strength improvement by mean of adherend notching and adherend taper in the adhesive single lap joints,” In Persian, Journal of Science and Technology of Composites, Vol. 7, No. 2, pp. 941–948, 2020.
[7] Najafi, M. Golzar, M. and Sadeghi, M. “Experimental evaluation of joint strength in polypropylene-glass fiber reinforced composites under tensile load,” In Persian, Iranian Journal of Manufacturing Engineering, Vol. 6, No. 2, pp. 39–46, 2019.
[8] Ashofteh, R. S. Pourang, H. Mobasheri, M. and Khoramishad, H., “The Effects of Temperature Level and Stress-to-Strength Ratio on Creep Behavior of Aluminum-Aluminum Single Lap Adhesive Joints,” In Persian, Journal of Science and Technology of Composites, Vol. 5, No. 3, pp. 353–358, 2018.
[9] Bhudolia, S. K. Gohel, G. Leong, K. F. and Islam, A., “Advances in Ultrasonic Welding of Thermoplastic Composites: A Review,” Materials, Vol. 13, No. 6, 2020.
[10] Abedini, R., “A Roadmap for Application of High Power Ultrasonic in Plastic and Metal Welding,” In Persian, Journal of Vibration and Sound, Vol. 10, No. 20, pp. 35–55, 2022.
[11] Senders, van Beurden, M. Palardy, G. and Villegas, I. F. “Zero-flow: a novel approach to continuous ultrasonic welding of CF/PPS thermoplastic composite plates,” Advanced Manufacturing: Polymer & Composites Science, Vol. 2, No. 3–4, pp. 83–92, 2016.
[12] Bose, S. Chelladurai, H. and Ponappa, K. “A review on recent developments in ultrasonic welding of polymers and polymeric composites,” Welding in the World, Vol. 68, No. 7, pp. 1881–1903, 2024.
[13] Abedini, R. Fartashvand, V. Abdullah, A. and Alizadeh, Y. “Evaluation of process parameters and ultrasonic vibration in hot pressing of metal powders,” Materials Science and Engineering: B, Vol. 281, p. 115731, 2022.
[14] Abedini, R. Abdullah, A. Alizadeh, Y. and Fartashvand, V., “A Roadmap for Application of High Power Ultrasonic Vibrations in Metal Forming,” In Persian, Vol. 16, pp. 323–334, 2019.
[15] Abedini, R. and SaberJahromi, M., “A review of applications of high power ultrasound technology in medical surgery,” In Persian, Journal of Vibration and Sound, Vol. 10, No. 20, pp. 157–173, 2022.
[16] chen, D. Sharma, S. K and Mudhoo, A., “Handbook on Applications of Ultrasound: Sonochemistry for Sustainability,” 1st Edition, Boca Raton, 2011.
[17] Jongbloed, B. Teuwen, J. Benedictus, R. and Villegas, I. F. “On differences and similarities between static and continuous ultrasonic welding of thermoplastic composites,” Composites Part B: Engineering, Vol. 203, p. 108466, 2020.
[18] Jongbloed, B. C. P. Teuwen, J. J. E. Benedictus, R. and Villegas, I. F., “A Study on Through-the-Thickness Heating in Continuous Ultrasonic Welding of Thermoplastic Composites,” Materials, Vol. 14, No. 21, 2021.
[19] Villegas, I. F., “In situ monitoring of ultrasonic welding of thermoplastic composites through power and displacement data,” Journal of Thermoplastic Composite Materials, Vol. 28, No. 1, pp. 66–85, 2015.
[20] Engelschall, M. Larsen, L. Fischer, F. J. C. and Kupke, M. “Robot-based Continuous Ultrasonic Welding for Automated Production of Aerospace Structures__DLR,” in SAMPE Europe Conference 2019 Nantes, Nantes, France, Vol. 1 of 2, pp. 273–280, 2021.
[21] “Welding thermoplastic composites.” https://www.compositesworld.com/articles/welding thermoplastic-composites, available May 13, 2024.
[22] Villegas, I. F. and Rubio, P. V., “On avoiding thermal degradation during welding of high-performance thermoplastic composites to thermoset composites,” Composites Part A: Applied Science and Manufacturing, Vol. 77, pp. 172–180, 2015.
[23] Palardy, G. and Villegas, I. F., “On the effect of flat energy directors thickness on heat generation during ultrasonic welding of thermoplastic composites.” Composite Interfaces, Vol. 24, No.2 pp. 203-214, 2017.
[24] Lionetto, F. Morillas, M. N. Pappadà, S. Buccoliero, G. Villegas, I. F. and Maffezzoli, A., “Hybrid welding of carbon-fiber reinforced epoxy based composites,” Composites Part A: Applied Science and Manufacturing, Vol. 104, pp. 32–40, 2018.
[25] Tao, W. Su, X. Wang, H. Zhang, Z. Li, H. and Chen, J., “Influence mechanism of welding time and energy director to the thermoplastic composite joints by ultrasonic welding,” Journal of Manufacturing Processes, Vol. 37, pp. 196–202, 2019.
[26] Jongbloed, B. Teuwen, J. Palardy, G. Villegas, I. F. and Benedictus, R. “Improving weld uniformity in continuous ultrasonic welding of thermoplastic composites,” ECCM 2018 - 18th European Conference on Composite Materials, Vol. 1 of 8. pp. 181–188, 2018.
[27] Jongbloed, B. Teuwen, J. Villegas, I. F. and Benedictus, R., “Investigation on the melting of the weld interface in continuous ultrasonic welding of thermoplastic composites,” 22th ICCM International Conferences on Composite Materials, 2019.
[28] Tsiangou, E. de Freitas, S. T. Benedictus, R. and Villegas, I. F., “On the sensitivity of the ultrasonic welding process of epoxy- to polyetheretherketone (PEEK)-based composites to the welding force and amplitude of vibrations,” Composites Part C: Open Access, Vol. 5, p. 100141, 2021.
[29] Jongbloed, B. Vinod, R. Teuwen, J. Benedictus, R. and Villegas, I. F., “Improving the quality of continuous ultrasonically welded thermoplastic composite joints by adding a consolidator to the welding setup,” Composites Part A: Applied Science and Manufacturing, Vol. 155, p. 106808, 2022.
[30] Ahanpanjeh, M. Fette, M. and Wulfsberg, J. P., “Contribution of Process Parameters to Geometric Deviations of the Robot for Continuous Ultrasonic Welding Process of Thermoplastic Composites,” 28th International Conference on Automation and Computing (ICAC), Birmingham, United Kingdom, pp. 1–7. 2023.
[31] Abedini Nodoushan, M. Abedini, R. and Hashemi, R. “Investigating the strength of the ultrasonic welding of the polyamide 6 continuous fiber glass composite,” In Persian, Journal of Science and Technology of Composites, Vol. 10, No. 1, pp. 2176–2183, 2023.
[32] Barkley, K. M. Arner, J. S. Pike, T. A. Diwakar, P. and Birrenkott, C. M. “Correlation of surface and interfacial temperature during differential ultrasonic spot welding,” Journal of Advanced Joining Processes, Vol. 7, p. 100142, 2023.
[33] Jongbloed, B. Teuwen, J. and Villegas, I. F. “On the use of a rounded sonotrode for the welding of thermoplastic composites,” Journal of Advanced Joining Processes, Vol. 7, p. 100144, 2023.
