[1] Raju, A., Shanmugaraja, M., “Recent researches in fiber reinforced composite materials: A review,” Materials Today: Proceedings, Vol. 46, pp. 9291-9296, 2021.
[2] Ebrahimnezhad Khaljiri, H., Eslami Farsani, R., Khorsand, H., Abbas Banaie, K., “Hybridization effect of fibers reinforcement on tensile properties of epoxy composites,” In Persian, Journal of Science and Technology of Composite, Vol. 1, No. 2, pp. 21-28, 2015.
[3] Singh, J., Kumar, M., Kumar, S., Mohapatra, S. K., “Properties of glass-fiber hybrid composites: a review,” Polymer-Plastics Technology and Engineering, Vol. 56, No. 5, pp. 455-469, 2017.
[4] Ebrahimnezhad-Khaljiri, H., “Experimental investigation of the synthetic polymeric nanofibers prepared via electrospinning,” In Electrospun Nanofibres, CRC Press, Boca Raton, pp. 56-77, 2023.
[5] Xue, J., Wu, T., Dai, Y., Xia, Y., “Electrospinning and electrospun nano fibers : methods, materials, and applications,” Chemical Reviews, Vol. 119, No. 8, pp. 5298-5415, 2019.
[6] Al-abduljabbar, A., Farooq, I., “Electrospun polymer nanofibers: processing, properties, and applications,” Polymers, Vol. 15, No. 1, 65, 2023.
[7] Saghafi, H., Palazzetti, R., Zucchelli, A., Minak, G., “Influence of electrospun nanofibers on the interlaminar properties of unidirectional epoxy resin/glass fiber composite laminates,” Journal of Reinforced Plastics and Composites, Vol. 34, No. 11, pp. 907-914, 2015.
[8] Nguyen, D. D., Vu, C. M., Choi, H. J., “Improvement of the mode I interlaminar fracture toughness of glass fiber/epoxy composites using polystyrene electrospun nanofibres,” Polymer Bulletin, Vol. 75, No. 11, pp. 5089-2189, 2018.
[9] Neisiany, R. E., Khorasani, S. N., Naeimirad, M., Lee, J. K. Y., Ramakrishna, S., “Improving mechanical properties of carbon/epoxy composite by incorporating functionalized electrospun polyacrylonitrile nanofibers,” Macromolecular Materials and Engineering, Vol. 302, No. 5, 1600551, 2017.
[10] Dong, Y., Mosaval, T., Haroosh, H. J., Umer, R., Takagi, H., Lau, K. T., “The potential use of electrospun polylactic acid nanofibers as alternative reinforcements in an epoxy composite system,” Journal of Polymer Science Part B: Polymer Physics, Vol. 52, No. 9, pp. 618-623, 2014.
[11] Cui, M., Chai, Z., Lu, Y., Zhu, J., Chen, J., “Developments of polyurethane in biomedical applications: A review,” Resources Chemicals and Materials, Vol. 2, No. 4, pp. 262-276, 2023.
[12] Das, A., Mahanwar, P., “A brief discussion on advances in polyurethane applications,” Advanced Industrial and Engineering Polymer Research, Vol. 3, No. 3, pp. 93-101, 2020.
[13] Yang, Z., Peng, H., Wang, W., Liu, T., “Crystallization behavior of poly(ε-caprolactone)/layered double hydroxide nanocomposites,” Journal of Applied Polymer Science, Vol. 116, No. 5, pp. 2658-2667, 2010.
[14] Kucinska-Lipka, J., Gubanska, I., Janik, H., Sienkiewicz, M., “Fabrication of polyurethane and polyurethane based composite fibres by the electrospinning technique for soft tissue engineering of cardiovascular system,” Materials Science and Engineering: C, Vol. 46, No. 2015, pp. 166-176, 2015.
[15] Bavafa Bigdilou, M., Eslami-Farsani, R., Ebrahimnezhad-Khaljiri, H., “The effect of carbon nanotubes on high velocity impact behavior of hybrid Kevlar- ultrahigh molecular weight polyethylene fibers composite with interlayer configuration”, In Persian, Journal of Science and Technology of Composites, Vol. 6, No. 4, pp. 533-540, 2020.
[16] De Schoenmaker, B., Van der Heijden, S., De Baere, I., Van Paepegem, W., De Clerck, K., “Effect of electrospun polyamide 6 nanofibres on the mechanical properties of a glass fibre/epoxy composite”, Polymer testing, Vol. 32, No. 8, pp. 1495-1501, 2013.
[17] Metin, F., Avcı, A., “Compression and interlaminar shear properties of nanoparticle doped hybrid nanofiber interleaved glass/epoxy composites,” Eskişehir Technical University Journal of Science and Technology A-Applied Sciences and Engineering, Vol. 22, No. 2021, pp.1-9, 2021.
[18] Zhou, Z., Tang, W., Xu, T., Zhao, W., Zhang, J., Bai, C., “Flexible strain sensors based on thermoplastic polyurethane fabricated by electrospinning: A review,” Sensors, Vol. 24, No. 15, 4793 , 2024.
[19] Mahato, B., Lomov, S. V., Shiverskii, A., Owais, M., Abaimov, S. G., A review of electrospun nanofiber interleaves for interlaminar toughening of composite laminates. Polymers, Vol. 15, No. 6, 1380, 2023.
[20] Ghadi, A., Ebrahimnezhad-Khaljiri, H., Ghezelbash, A., “The simultaneous effect of graphene and nanoclay on the mechanical properties of multi-scale composite by dispersing and coating,” Journal of Materials Research and Technology, Vol. 37, pp. 4732-4738, 2025.
[21] Palazzetti, R., “Flexural behavior of carbon and glass fiber composite laminates reinforced with Nylon 6, 6 electrospun nanofibers,” Journal of Composite Materials, Vol. 49, No. 27, pp. 3407-3413, 2015.
[22] Metin, F., Avcı, A., “In-plane quasi-static and out-of-plane dynamic behavior of nanofiber interleaved glass/epoxy composites and finite element simulation,” Composite Structures, Vol. 270, 114085, 2021.
[23] Palazzetti, R., Zucchelli, A. J. C. S., “Electrospun nanofibers as reinforcement for composite laminates materials–a review,” Composite Structures, Vol. 182, pp. 711-727, 2017.
[24] Taşyürek, M., Kara, M., “Low-velocity impact response of pre-stressed glass fiber/nanotube filled epoxy composite tubes,” Journal of Composite Materials, Vol. 55, No. 7, pp. 915-926, 2021.
[25] Dhilipkumar, T., Rajesh, M., “Effect of using multiwall carbon nanotube reinforced epoxy adhesive in enhancing glass fiber reinforced polymer composite through cocure manufacturing technique,” Polymer Composites, Vol. 42, No. 8, pp. 758-3772, 2021.
[26] Monticeli, F. M., Pitanga, M. Y., Cioffi, M. O. H., Voorwald, H. J. C., “Mode I and mode II delamination of carbon/glass/epoxy hybrid composite: A statistics-based analysis,” Polymer Composites, Vol. 42, No. 8, pp. 3857-3869, 2021.
