@article { author = {kamali, samaneh and Khavandi, Alireza and shemshad, sepideh and malekmohammadi, elhamm}, title = {Effect of Nitinol Addition on the Mechanical properties and the Microstructure of Nactural Hydroxyapatite Obtained from Calf Femoral Bone}, journal = {Journal of Science and Technology of Composites}, volume = {5}, number = {2}, pages = {238-244}, year = {2018}, publisher = {Iran University of Science and Technology}, issn = {2383-3823}, eissn = {}, doi = {10.22068/jstc.2018.63993.1318}, abstract = {Hydroxyapatite have been studied intensively for bone repairing and replacement applications due to their biocompatibility, bioactivity and the ability to bond to bone. Despite the poor mechanical properties of hydroxyapatite, its unique biological properties leads to study improving its properties rather than completely replacing it with other biomaterials. One of the ways to improve the properties of hydroxyapatite as a bioceramic, is preparing composite based hydroxyapatite. In this study, Nitinol was used as a reinforce phase in order to improve the mechanical properties of hydroxyapatite. Pure hydroxyapatite (HA) was obtained by the calcination of calf femoral bone.Then the hydroxyapatite composite reinforced with 5, 10 and 15 Wt% Nitinol was produced by powder metallurgy successfully. In order to examine changes occurring in the composite phase after sintering and fracture surface, XRD, FTIR and SEM were used, Respectively. Also, the compressive strength were measured to compare the bone properties. The results showed that hydroxyapatite composite with 10% Nitinol has the sutable conditions. It also optimizes the mechanical properties compared to other compounds intended.}, keywords = {Composite,Nitinol,Hydroxyapatite,Mechanical properties}, title_fa = {اثر افزودن ذرات نایتینول بر خواص مکانیکی و ریزساختار هیدروکسی‬آپاتیت طبیعی بدست‬آمده از استخوان گوساله}, abstract_fa = {هیدروکسی‬ آپاتیت به دلیل خواص زیست‬ سازگاری، زیست‬ فعالی و توانایی پیوند با استخوان، به منظور ترمیم و جایگزینی استخوان مورد توجه قرار گرفته است. این ماده باوجود داشتن خواص مکانیکی ضعیف، خواص بیولوژیکی منحصر به فردی از خود نشان می‌دهد. این موضوع باعث تمرکز بیشتر مطالعات در راستای بهبود خواص مکانیکی این ماده تا جایگزینی آن شده است. یکی از راه‬ های بهبود خواص هیدروکسی‬ آپاتیت به عنوان یک بیوسرامیک، تهیه کامپوزیت بر پایه هیدروکسی‬ آپاتیت است. در این پژوهش از نایتینول به عنوان فاز تقویت کننده به منظور بهبود خواص مکانیکی هیدروکسی‬ آپاتیت استفاده شد. هیدروکسی‬ آپاتیت به روش سوزاندن استخوان گوساله، از منابع طبیعی تهیه شد و سپس کامپوزیت‬ های هیدروکسی‬ آپاتیت-نایتینول با 5، 10 و 15 درصد وزنی نایتینول به روش متالورژی پودر سنتز شدند. به منظور برررسی تحولات فازی رخ داده در کامپوزیت پس از زینتر و بررسی سطح مقطع شکست به ترتیب از آنالیز پراش پرتوی ایکس(XRD)، طیف سنجی پرتو فروسرخ (FTIR) و میکروسکوپ الکترونی روبشی(SEM) استفاده شد. سپس خواص مکانیکی نظیر استحکام فشاری و مدول الاستیک مورد بررسی قرار گرفت. نتایج نشان داد که کامپوزیت هیدروکسی‬ آپاتیت-10% نایتینول دارای شرایط مناسب و بهینه از نظر خواص مکانیکی نسبت به سایر ترکیبات در نظر گرفته شده، است.}, keywords_fa = {کامپوزیت,هیدروکسی‬ آپاتیت,نایتینول,خواص مکانیکی}, url = {https://jstc.iust.ac.ir/article_31954.html}, eprint = {https://jstc.iust.ac.ir/article_31954_519c361324018069a6ff6453f3c44c88.pdf} }