@article { author = {Khalili, Seyed Mohammad Reza and Mir Mohammad Hossein Ahari1, Seyed Mahyar and Sedigh1, Yaser}, title = {Experimental and numerical investigation on semi-cylindrical compositelatticereinforced with triangular cellssubjected to high velocity impact}, journal = {Journal of Science and Technology of Composites}, volume = {5}, number = {2}, pages = {208-217}, year = {2018}, publisher = {Iran University of Science and Technology}, issn = {2383-3823}, eissn = {}, doi = {10.22068/jstc.2018.42683.1167}, abstract = {In this paper, the process of manufacture of template for lattice cylindrical composite is studied and lattice composite samples has been manufactured by the filament winding process. Also, the structural behavior of lattice cylindrical composite made by glass/Epoxy with triangular cells has been studied under high velocity impact by experimental and numerical analysis. A gas gun testing machine has been used for high velocity impact test that recorded the input and output velocities. Also, for this test, suitable fixture has been designed. The cylindrical projectile with spherical head has been used as impactor. Numerical simulation of impact tests has been conducted by ABAQUS commercial finite element code and the results have been verified by experimental results. Output velocity, surface damage, the separation between the shell and the rib are compared experimentally and numerically. Finally, numerical investigation of the shape of the projectile and the layup orientation has been done. Results show that 45 degrees angle of layup has minimum output velocity and maximum energy absorption. Also, the projectile with flat head has been created maximum area damage, because of the less area contact with shell relative to another projectiles, therefore has less output velocity and more energy absorption.}, keywords = {Cylindrical lattice,experimental analysis,numerical simulation,energy absorption,Damage}, title_fa = {تحلیل تجربی و عددی نیم استوانه مشبک کامپوزیتی تقویت شده با الگوی مثلثی تحت بارگذاری ضربه سرعت بالا}, abstract_fa = {در این مقاله فرایند ساخت قالب برای استوانه مشبک کامپوزیتی مطالعه گردیده و نمونه مشبک با استفاده از روش رشته پیچی ساخته شده است. همچنین رفتار سازه مشبک کامپوزیتی استوانه‌ای با الگوی مثلثی از جنس شیشه- اپوکسی تحت بار ضربه‌ای به صورت تجربی و عددی بررسی شده است.. به منظور آزمون ضربه از دستگاه تفنگ گازی استفاده شده است که سرعت ورودی و خروجی از دستگاه به دست می‌آید. همچنین برای این آزمون فیکسچر مناسبی طراحی شده است. پرتابه مورد استفاده به شکل استوانه و دارای سر کروی می‌باشد. شبیه سازی عددی آزمون ضربه انجام شده است و با نتایج تجربی صحت سنجی شده است. سرعت خروجی، سطح آسیب، جدایش بین پوسته و ریب به صورت تجربی و عددی با هم مقایسه شده‌اند. در نهایت به بررسی عددی اثر نوع پرتابه و زاویه لایه چینی بر روی پارامترهای ضربه پرداخته شده است. در محدوده زاویه لایه چینی 45 درجه کم‌ترین میزان سرعت خروجی پرتابه و بیش‌ترین میزان جذب انرژی را دارا می‌باشد. پرتابه سرتخت نسبت به دو پرتابه سرمخروطی و سر کروی به دلیل این‌که سر پرتابه سطح تماس بیش‌تری با پوسته دارد، بیش‌ترین آسیب را به سازه وارد می‌کند و در نتیجه سرعت خروجی پرتابه کم‌تر و جذب انرژی سازه بیش‌تر است.}, keywords_fa = {استوانه مشبک,آزمون تجربی ضربه,شبیه سازی عددی,جذب انرژی,آسیب}, url = {https://jstc.iust.ac.ir/article_31850.html}, eprint = {https://jstc.iust.ac.ir/article_31850_4a1e5a1dda5b84f51b2c8fe25304ee9f.pdf} }