@article { author = {Hamidi, Ehsan and Panahizadeh, valiollah}, title = {Experimental Analysis of Mechanical Properties of Nanocomposites Based on Poly amide 6/ EPDM /Carbon Nanotubes}, journal = {Journal of Science and Technology of Composites}, volume = {8}, number = {1}, pages = {1453-1460}, year = {2021}, publisher = {Iran University of Science and Technology}, issn = {2383-3823}, eissn = {}, doi = {10.22068/jstc.2021.529756.1723}, abstract = {In this paper, the mechanical properties of nanocomposites based on a matrix of two phases of polyamide 6 polymer and ethylene propylene diene monomer (EPDM) reinforced with carbon nanotubes are investigated. The compounds include 0%, 1%, 2% and 3% by weight of carbon nanotubes as well as 5 and 10% by weight of EPDM-G-MA as compatible and 10 and 20% by weight of EPDM prepared by an internal mixer. Samples were prepared for mechanical tests by a hot press machine. Mechanical tests were performed to determine the impact and tensile strengths, modulus of elasticity and elongation at failure. It was observed that adding 1% by weight of carbon nanotubes increases the impact strength by 12%, tensile strength by 25% and elastic modulus by 43%, but decreases the failure length by 13%. Also, with the presence of 10% EPDM, impact strength increased by 27% and elongation at fracture by 34%, but the tensile strength of polyamide decreased by 5% and its elastic modulus by 19%. To improve the mentioned cases, by adding 5% EPDM-G-MA, the impact strength increased by 14%, the tensile strength by 5%, the elastic modulus by 20% and the elongation at break by 13%. Finally, by adding carbon nanotubes and combining EPDM and EPDM-G-MA, all the mechanical properties mentioned in polyamide 6 were improved}, keywords = {Nanocomposites,Mechanical properties,Polyamide,EPDM,Carbon nanotubes}, title_fa = {تحلیل تجربی خواص مکانیکی نانوکامپوزیت‌های بر پایه پلی‌آمید 6/ EPDM/ نانولوله‌های کربنی}, abstract_fa = {در این مقاله، خواص مکانیکی نانوکامپوزیت‌هایی بر پایه ماتریسی از دو فاز پلیمری پلی‌آمید 6و اتیلن پروپیلن دی ان مونومر (EPDM) تقویت شده با نانولوله‌های کربنی بررسی شده است. ترکیبات شامل 0% ، 1% ، 2 % و 3% وزنی نانولوله کربنی و نیز 5 % و 10% وزنی EPDM-G-MA به‌عنوان سازگار کننده و 10% و20 % وزنی EPDM هستند که توسط یک مخلوط‌کن داخلی تهیه شدند. نمونه‌ها برای انجام آزمون‌های مکانیکی توسط یک دستگاه پرس داغ تهیه شدند. آزمون‌های مکانیکی برای تعیین استحکام‌های ضربه و کشش، مدول الاستیسیته و ازدیاد طول در شکست انجام شدند. مشاهده شد که افزودن 1% وزنی نانولوله کربنی، استحکام ضربه را 12%، استحکام کششی را 25% و مدول الاستیک را 43% افزایش می‌دهد ولی ازدیاد طول در شکست را 13% کاهش می‌دهد. همچنین با حضور10 % وزنیEPDM ، استحکام ضربه 27% و ازدیاد طول در شکست 34% افزایش یافته ولی استحکام کششی پلی‌آمید 5% و مدول الاستیک آن 19% کاهش می‌یابد. برای بهبود موارد ذکر شده با افزودن 5% EPDM-G-MA استحکام ضربه 14% ، استحکام کششی 5% ، مدول الاستیک 20% و ازدیاد طول در شکست 13% افزایش پیدا کرد. نهایتاً با افزودن نانولوله‌های کربنی و ترکیب EPDM و EPDM-G-MA، همه خواص مکانیکی مذکور در پلی‌آمید6، بهبود داده شد.}, keywords_fa = {نانوکامپوزیت,خواص مکانیکی,پلی‌آمید,EPDM,نانولوله‌های کربنی}, url = {https://jstc.iust.ac.ir/article_245043.html}, eprint = {https://jstc.iust.ac.ir/article_245043_8132743d40084456cebfcd7700f46e2a.pdf} }