@article { author = {Ezatpour, Hamidreza and Torabi Parizi, Marziyeh}, title = {Effect of carbonaceous hybrid reinforcement and extrusion temperature on the microstructure and mechanical properties of AA7075 matrix hybrid composite prepared by semi-solid casting}, journal = {Journal of Science and Technology of Composites}, volume = {8}, number = {1}, pages = {1339-1352}, year = {2021}, publisher = {Iran University of Science and Technology}, issn = {2383-3823}, eissn = {}, doi = {10.22068/jstc.2021.141890.1695}, abstract = {The improvement level of mechanical properties of aluminum matrix composites reinforced to carbonaceous materials is lower than expected. The intrinsic characteristics and production methods are effective parameters on microstructure and efficiency of these composites. In this study, AA7075/CNTs+GNPs hybrid composites were fabricated by flake powder metallurgy process combined to solution method, semi-solid casting and high temperature extrusion. After determination of optimum VGNP/VCNT ratio in hybrid carbonaceous reinforcement (= 0.167), its effect on microstructure and mechanical properties of AA7075 alloy was investigated. The semi-solid casting process led to destroy the network structure of carbonaceous reinforcements and to entrap them mechanically into the aluminum matrix and to segregate alloy elements on their surface. In optimum temperature of extrusion process (= 400 °C), the uniform distribution of carbonaceous reinforcement and the decrease in the average grain size (~39%) were obtained. Hardness, tensile and compressive strengths of the hybrid composite were improved by 17%, 51% and 28% compared to AA7075 matrix alloy. The extraordinary efficiency of tensile strength (~3952%) was obtained in the hybrid composite as a result of effective load transfer due to effect of the pulling out and the bridging of carbonaceous reinforcements.}, keywords = {AA7075 alloy,Carbonaceous hybrid reinforcement,extrusion,Microstructure,Mechanical properties}, title_fa = {بررسی اثر تقویت کننده هیبریدی کربنی و دمای اکستروژن روی ریزساختار و خواص مکانیکی کامپوزیت هیبریدی زمینه آلومینیومی AA7075 تولید شده توسط ریخته گری نیمه جامد}, abstract_fa = {میزان بهبود خواص مکانیکی کامپوزیت های زمینه آلومینیومی تقویت شده با مواد کربنی، پایین تر از حد انتظار است. خواص ذاتی اجزای سازنده و روش تولید، بر ویژگی های ریز ساختاری و عملکرد این کامپوزیت ها تاثیر بسزایی دارد. در تحقیق حاضر، استراتژی ساده ای برای بهبود توزیع تقویت کننده ی کربنی با حداقل آسیب ساختاری و پیوند فصل مشترکی مناسب، اتخاذ شده است. کامپوزیت GNP-CNT/AA7075 از تلفیق فرایند متالورژی پودر ورقه ای، روش انحلالی به همراه ریخته گری نیمه جامد و اکستروژن دمای بالا، تولید شده است. پس از تعیین نسبت بهینه ی VGNP/VCNT در تقویت کننده ی هیبریدی کربنی (0.167)، اثر حضور آن بر تحولات ریزساختاری و خواص مکانیکی آلیاژ AA7075 مورد بررسی قرار گرفته است. فرایند ریخته گری نیمه جامد علاوه بر تخریب ساختار شبکه ای فاز تقویت کننده، سبب به دام فتادن مکانیکی آن ها درون زمینه و جدایش عناصر آلیاژی بر سطح تقویت کننده ی کربنی شده است. در دمای بهینه ی فرایند اکستروژن (400 °C)، توزیع یکنواخت GNP-CNT در درون زمینه و کاهش 39% اندازه ی دانه، حاصل شده است. ریزسختی، مقادیر استحکام تسلیم کششی و فشاری این کامپوزیت نسبت به آلیاژ AA7075 به ترتیب 17%، 51% و 28% بهبود یافته است. اثر بخشی فوق العاده ی استحکام کششی،3952% ، در نتیجه ی انتقال بار موثر (کشیده شدن تقویت کننده ی کربی در سطح شکست) و جذب انرژی (پل زدن) است.}, keywords_fa = {آلیاژ آلومینیوم 7075,تقویت کننده هیبریدی کربنی,اکستروژن,ریزساختار,خواص مکانیکی}, url = {https://jstc.iust.ac.ir/article_244490.html}, eprint = {https://jstc.iust.ac.ir/article_244490_918c1138dde0988bbd3b4f02476436d7.pdf} }