@article { author = {Ghasemi, Ahmad Reza and Mohammadi, Mohammad}, title = {Three-dimensional residual stresses analysis of nanocomposite polymeric matrix based on fiber reinforced carbon nanotubes}, journal = {Journal of Science and Technology of Composites}, volume = {2}, number = {4}, pages = {23-30}, year = {2016}, publisher = {Iran University of Science and Technology}, issn = {2383-3823}, eissn = {}, doi = {}, abstract = {In this research, distribution of residual stresses in three-phase representative volume element (RVE) consisting of carbon fiber, carbon nanotube and matrix, as three dimensional has been determined. Finite element analysis and cylinder analytical model have been used to determination of residual stresses in every phase. Cylinder analytical model has been developed to three-phase RVE. Coefficient of thermal expansion has been considered differently at various directions in carbon fiber and carbon nanotube phases. Placement of carbon nanotubes has been considered parallel to carbon fiber and as ring around carbon fiber using electrophoresis method. Different volume fraction of carbon nanotube has been considered as 0%, 1%, 2%, 3%, 4% and 5% and distribution of residual stresses of different volume fraction was compared together, but volume fraction of carbon fiber is considered as constant equal 60%. Radial residual stress, tangential residual stress, axial residual stress and residual stress invariant have been determined in different phases. Results of residual stress invariant of two different analysis as finite element and cylinder analytical model have been compared in different phases that are in good agreement together.}, keywords = {Representative volume element,Residual stresses,Carbon Nanotube,finite element analysis}, title_fa = {تحلیل سه‌بعدی تنش‌های پسماند در نانوکامپوزیت‌های پایه پلیمری با الیاف تقویت شده توسط نانولوله‌های کربنی}, abstract_fa = {در این تحقیق به مطالعه توزیع تنش‌های پسماند در سلول واحد سه‌فازی شامل سه فاز رشته کربنی، نانولوله کربنی و ماتریس به‌شکل سه بعدی و با توسعه مدل دیسک دایره‌ای پرداخته شده است. توزیع تنش‌های پسماند سلول واحد در هر یک از فازها، با استفاده از دو روش المان محدود و حل تحلیلی، انجام شده است. ضریب انبساط حرارتی هر یک از دو فاز رشته کربنی و نانولوله کربنی، در راستاهای عرضی و طولی، به‌صورت متفاوت در نظر گرفته شده است و نحوه قرارگیری نانولوله‌های کربنی بر رشته کربنی با استفاده از روش الکتروفورز، به‌صورت موازی و به‌صورت حلقه‌گون بر رشته کربنی در نظر گرفته شده است. درصد حجمی رشته کربنی نیز به‌صورت یکسان و برابر با 60% در نظر گرفته شده است، لیکن توزیع تنش‌های پسماند، برای درصدهای حجمی متفاوت نانولوله کربنی شامل 0%، 1%، 2%، 3%، 4%، 5% و برای حالت دو‌فازی شامل رشته کربنی و ماتریس انجام و مقایسه شده است. توزیع تنش‌های پسماند شامل تنش‌های شعاعی، تنش‌های مماسی، تنش‌های طولی و مجموع تنش‌های اصلی در هر یک از فازها مطالعه شده است. در پایان مجموع تنش‌های پسماند حاصل از دو روش المان محدود و روش تحلیلی توسعه یافته، برای سلول واحد سه فازی با یکدیگر مقایسه شده است، که از مطابقت بسیار خوبی برخوردار می‌باشد.}, keywords_fa = {سلول واحد سه فازی,تنش‌های پسماند,نانولوله کربنی,تحلیل المان محدود}, url = {https://jstc.iust.ac.ir/article_15828.html}, eprint = {https://jstc.iust.ac.ir/article_15828_dc316cbfa2a8b3f829fdaa06329cb2e4.pdf} }