[1]. Beyer, T., Bailey, D. L., Birk, U., Buvat, I., Catana, C., Cheng, Z., Fang, Q., Giove, F., Kuntner, C., Laistler, E., Moscato, F., Nekolla, S. G., Rausch, I., Ronen, I., Saarakkala, S., Thielemans, K., Van Elmpt, W. and Moser, E., “Medical Physics and Imaging–A Timely Perspective,” Frontiers in Physics, vol. 9, pp.1-12, 2021.
[2]. Hussain, S. T., Mubeen, I., Ullah, N., Shah, S. S. U. D., Khan, B. A., Zahoor, M., Ullah, R., Khan, F. A. and Sultan, M. A., “Modern Diagnostic Imaging Technique Applications and Risk Factors in the Medical field: A review,” BioMed Research International, vol. 2022, pp. 1–19, 2022.
[3]. Berger, M., Yang, Q. and Maier, A., “X-ray Imaging,” in Lecture Notes in Computer Science, pp. 119–145, 2018.
[4]. Datta, A., Zhong, Z. and Motakef, S., “A new generation of direct X-ray detectors for medical and synchrotron imaging applications,” Scientific Reports, vol. 10, no. 1, 2020.
[5]. Kovács, A., Bischoff, P., Haddad, H., Kovács, G., Schaefer, A., Zhou, W. and Pinkawa, M., “Personalized Image-Guided Therapies for Local Malignencies: Interdisciplinary options for interventional radiology and Interventional radiotherapy,” Frontiers in Oncology, vol. 11, 2021.
[6]. Vaz, P., “Radiological protection, safety and security issues in the industrial and medical applications of radiation sources,” Radiation Physics and Chemistry, vol. 116, pp. 48–55, 2015.
[7]. Erdem, M., Baykara, O., Doğru, M. and Kuluöztürk, F., “A novel shielding material prepared from solid waste containing lead for gamma ray,” Radiation Physics and Chemistry, vol. 79, no. 9, pp. 917–922, 2010.
[8]. Nambiar, S. and Yeow, J. T. W., “Polymer-Composite materials for radiation protection,” ACS Applied Materials & Interfaces, vol. 4, no. 11, pp. 5717–5726, 2012.
[9]. Ahmadi, S.J., Rafiei Sarmazdeh, Z., Zahedi Dizji, S. M., Jafari, S. H., Kasesaz, Y., “Comparison of performance of composite and nanocomposites based on heavy polyethylene and boron nitride for use in neutron shielding”. In Persian, Journal of Nuclear Sciences and Techniques, vol. 42, no. 3, pp.79-88, 2023.
[10]. Murki, A., Qasri, M., Murki, Gh., A-Kasai, P., Ahadi, B., Rahmati, A., “Preparation of flexible gamma ray shielding composites based on SBR rubber”. In Persian, Journal of Nuclear Science and Technology, vol. 41, no. 3, pp. 97-106, 2019.
[11]. Shirmardi, S.P., Adeli, R., Ahmadi, S. J., Mazinani, S., “Attenuation of high-energy secondary neutron field gamma using a lead-free reinforced composite shield”. In Persian, Journal of Nuclear Science and Technology, vol. 37, no. 1, pp. 23-29, 2015.
[12]. Jiang, Y., Guo, W., Yang, H., “Numerical studies on the effective shear modulus of particle reinforced composites with an inhomogeneous inter-phase”. Computational Materials Science, vol. 43, no. 4, pp. 724–73, 2008.
[13]. Jiang, Y., Yang, H., Tohgo, K., “Three-phase incremental damage theory of particulate-reinforced composites with a brittle interphase”. Composite Structures, vol. 93, no. 3, pp. 1136–1142, 2011.
[14]. Yang, H., Chen, P., Jiang, Y., Tohgo, K., “Incremental damage theory of particulate-reinforced composites with a ductile interphase”. Composite Structures, vol. 93, no. 10, pp. 2655–2662, 2011.
[15]. Ye, J., Chu, C., Zhai, Z., Wang, Y., Shi, B., Qiu, Y., “The Interphase Influences on the Particle-Reinforced Composites with Periodic Particle Configuration”. Applied Sciences, vol. 7, no. 1, pp. 102, 2017.
[16]. Thumwong, A., Darachai, J. and Saenboonruang, K., “Comparative x-ray shielding properties of Single-Layered and Multi-Layered Bi2O3/Nr composites: simulation and numerical studies,” Polymers, vol. 14, no. 9, p. 1788, 2022.
[17]. Park, S.-E., Kim, H., Kim, Y., Kim, E. and Seo, Y., “Multilayer-Structured non-leaded Metal/Polymer composites for enhanced x-ray shielding,” MRS Advances, vol. 3, no. 31, pp. 1789–1797, 2018.
[18]. Uthoff, H., Benenati M. J., Katzen, B. T., Peña, C., Gandhi, R., Staub, D. and Schernthaner, M., “Lightweight Bilayer Barium Sulfate–Bismuth Oxide Composite thyroid collars for superior radiation Protection in fluoroscopy-guided interventions: a prospective randomized controlled trial,” Radiology, vol. 270, no. 2, pp. 601–606, 2014.
[19]. Johansen, S., Hauge, I. H. R., Hogg, P., England, A., Lança, L., Gunn, C. and Sanderud, A., “Are Antimony-Bismuth Aprons as Efficient as Lead Rubber Aprons in Providing Shielding against Scattered Radiation,” Journal of Medical Imaging and Radiation Sciences, vol. 49, no. 2, pp. 201–206, 2018.
[20]. Bayoumi, E. E., El‐Magied, M. O. A., Elshehy, E. A., Atia, B. M., Mahmoud, K. A., Khalil, L. H. and Mohamed, A. A., “Lead–bismuth tungstate composite as a protective barrier against gamma rays,” Materials Chemistry and Physics, vol. 275, p. 125262, 2022.
[21]. Zhou, D., Zhang, J. P., Zheng, J., Wu, Y., Zhao, Y. and Zhou, Y., “Co-shielding of neutron and γ-ray with bismuth borate nanoparticles fabricated via a facile sol-gel method,” Inorganic Chemistry Communications, vol. 77, pp. 55–58, 2017.
[22]. Sayyed, M. I., Akman, F., Kaçal, and Kumar, A., “Radiation protective qualities of some selected lead and bismuth salts in the wide gamma energy region,” Nuclear Engineering and Technology, vol. 51, no. 3, pp. 860–866, 2019.
[23]. Sallam, F. M., Madbouly, O. I., Elalaily A. M., and Ezz-Eldin, N. A., “Physical properties and radiation shielding parameters of bismuth borate glasses doped transition metals,” Journal of Alloys and Compounds, vol. 843, pp. 156056, 2020.
[24]. ElSawy, A., “Performance of Nanoparticle Materials on Radiation Shielding Properties Using Mont Carlo Method”, Int. J. Eng. Sci., vol. 6, pp. 74–82, 2017.
[25]. Hassan, H. E., Badran, H. M., Aydarous, A. and Sharshar, T., “Studying the effect of nano lead compounds additives on the concrete shielding properties for γ-rays,” Nuclear Instruments and Methods in Physics Research Section B: Beam Interactions with Materials and Atoms, vol. 360, pp. 81–89, 2015.
[26]. Rashad. M., Tekın. H. O., Zakaly. H. M. H., Pyshkina. М., Issa. S. A. M. and Süsoy. G., “Physical and nuclear shielding properties of newly synthesized magnesium oxide and zinc oxide nanoparticles,” Nuclear Engineering and Technology, vol. 52, no. 9, pp. 2078–2084, 2020.
[27]. Olarinoye, I. O., Alomairy, S., Sriwunkum, C. and Al-Buriahi, “Effect of Ag2O/V2O5 substitution on the radiation shielding ability of tellurite glass system via XCOM approach and FLUKA simulations,” Physica Scripta, vol. 96, no. 6, p. 065308, 2021.
[28]. Tekın, H. O. and Manıcı, T., “Simulations of mass attenuation coefficients for shielding materials using the MCNP-X code,” Nuclear Science and Techniques, vol. 28, no. 7, 2017.
[29]. Akman, F., Özkan, İ., Kaçal, Polat, H., Issa, S. A. M., Tekın, H. O. and Ağar, O., “Shielding features, to non-ionizing and ionizing photons, of FeCr-based composites,” Applied Radiation and Isotopes, vol. 167, p. 109470, 2021.
[30]. Alabsy M. T. and Elzaher M. A., “Radiation shielding performance of metal oxides/EPDM rubber composites using Geant4 simulation and computational study,” Scientific Reports, vol. 13, no. 1, 2023.
[31]. More, C. V., Akman, F., Dilsiz, K., Oğul, H. and Pawar, P. P., “Estimation of neutron and gamma-ray attenuation characteristics of some ferrites: Geant4, FLUKA and WinXCom studies,” Applied Radiation and Isotopes, vol. 197, p. 110803, 2023.
[32]. Taheri, A., Khandaker, M. U., Moradi, F., Bradley, D., “A review of recent advances in the modeling of nanoparticle radiosensitization with the Geant4-DNA toolkit”. Radiation Physics and Chemistry, vol. 212, pp. 111146, 2023.
[33]. Chatzipapas, K., Tran, N. H., Dordevic, M., Zivkovic, S., Zein, S. A., Shin, W., Sakata, D., Lampe, N., Brown, J. M., Ristić-Fira, A., Petrović, I., Kyriakou, I., Emfietzoglou, D., Guatelli, S., Incerti, S., “Simulation of DNA damage using Geant4‐DNA: an overview of the molecularDNA example application”. Precision Radiation Oncology, vol. 7, no. 1, 4–14,
[34]. Motakef Kazemi N., “Preparation and evaluation of bismuth oxide nanoparticles by thermal degradation of metal organic framework”. In Persian, Medical Science Journal of Islamic Azad University, Tehran Medical Branch, vol. 31, No. 3, pp. 259-265, 2021.
[35]. Ghorbankhan, A., Nakhaei, M.R, and Safarpour, P., “Modeling and Optimization of Mechanical Properties of PA6/NBR Nanocomposite Reinforced with Perlite Nanoparticles”, In Persian, Journal of Science and Technology of Composites, Vol. 8, No. 1, pp. 1421-1430, 2021.
[36]. Soleymani, H., Fereidoon, A., Albooyeh, A., Nakhaei, M. R., “Effect of perlite nanoparticles addition on the mechanical and microstructure properties of PP/NR blend fabricated by melt mixing processing: Optimizing by Response Surface Approach,” In Persian, Journal of Science and Technology of Composites, Vol. 9, No. 4, pp. 2089-2098, 2023.
[37]. Soleymani, H., Nakhaei, M. R., Naderi, Gh., “Experimental and mathematical investigation of mechanical and microstructural properties of PA6/NBR nanocomposite reinforced with silicon carbide (SiC) nanoparticles,” In Persian, Journal of Science and Technology of Composites, Vol. 8, No. 4, pp.1789-1796, 2022.
[38]. Taheri-Behrooz, Fathollah. Mahdavizade, S. M. J. and Gholami, M. J., “Micromechanics of stress transfer through the interphase in pull out test of fiber through the resin”, In Persian, Journal of Science and Technology of Composites, Vol. 4, No. 3, pp. 283-294, 2017.
[39]. Watanabe, A., Phase equilibria in the system Bi2O3-Y2O3: no possibility of delta-Bi2O3 Solid State Ionics, Vol.86–88, pp. 1427–1430, 1996.
[40]. Alipoor, M.R. and Eshghi, M., “Ionizing radiation shielding properties of ceramic fibers using Monte Carlo simulation,” In Persian, Journal of The Iranian Ceramic Society, Vol.18, No. 4, pp. 48-56, 2023.
[41]. Alipoor, M. and Eshghi, M., “Evaluation of carbon-platinum nanotubes in the performance of gamma ray shields”. Nano World, Vol. 19, No. 72, pp. 1-9, 2023.
