[1] Khademi Eslam, H. Yousefnia, Z. Ghasemi, E. and Talaeipoor, T., “Investigating the mechanical properties of wood flour/ polypropylene/ nanoclay composite,” In Persian, Iranian Journal of Wood and Paper Science Research, Vol. 28, No. 1, pp. 153-168, 2012.
[2] Yari Firouzabadi, Z. Vaziri, V. Kord, B. and Jamalirad, L., “Investigation of the mechanical-dynamic and thermal properties of nanocomposites manufactured from rapeseed stalk flour/ nanographene and high-density polyethylene,” In Persian, Iranian Journal of Wood and Paper Industries13, No. 4, pp. 445-456, 2023.
[3] Shahrajabian, H. and Maleki Khorasgani, A., “Investigation of the physical and mechanical properties of Wood plastic composites based on high density polyethylene/ polypropylene/recycled poly (ethylene terephthalate)”, In Persian, Journal of Science and Technology of Composites, Vol. 5, No. 1, pp. 127-134, 2018.
[4] Girone`s, J., Pimenta, M. T. B., Vilaseca, F., Carvalho, A. J. F., Mutjea, P. and Curvelo, A. A. S., “Blocked diisocyanates as reactive coupling agents: Application to pine fiber- polypropylene composites,” Carbohydrate polymers, Vol. 74, pp. 106- 113, 2008.
[5] Shahreki, A., Nosrati Sheshkal, B. Mohebbi Gargari, R. and Abdouss, M., “The effect of nano clay and MAPP coupling agent on physical, mechanical and natural durability of polypropylene Haloxylon wood flour composite,” In Persian, Journal of Wood & Forest Science and Technology, Vol. 23, No. 2, pp. 265-283, 2016.
[6] Shakeri, A., Safdari, V. R., Rohnia, M. and Nourbakhsh, A., “An analysis of the combined effects of isocyanate HMDI and maleic anhydride (MAPE) coupling agents on the mechanical properties of HDPE- wood flour composite,” In Persian, Iranian Journal of Wood and Paper Science Research, Vol. 28, NO. 2, pp. 290- 300, 2013.
[7[ Azad, F., Faezipoor, M., and Tajvidi, M., “Effect of compatibilizer, MAPP, on physical and mechanical properties of reed stem flour- polypropylene composites,” In Persian, Iranian Journal of Wood and Paper Science Research, Vol. 24, NO. 2, pp. 232- 243, 2009.
]8[ Haghpanah, M., “Nosrati Sheshkal, B., and Mohebbi Gargari, R., The effect of using the textile waste fibers and nanoclay particles on physical and mechanical properties of composite made from wood flour/ polypropylene,” In Persian, Iranian Journal of Wood and Paper Industries, Vol. 6, No.1, pp. 1-12, 2015.
[9] Kord, B., “Investigation on The Effects of Nanoclay Particles on Mechanical Properties of Wood Polymer Composites Made of High Density Polyethylene-Wood Flour,” In Persian, Iranian Journal of Wood and Paper Science Research, Vol. 25, NO. 25, pp. 91-101, 2010.
[10 Parvinzadeh Gashti, M., Moradian, S., Rashidi, A. S., and Yazdanshenas, M. A., “Effect of Nanosilica Type on Properties of Polyethylene Terephthalane/Silica Nano composite,” In Persian, Iranian Journal of Polymer Science and Technology, Vol. 25, No. 3, pp. 219-203, 2012.
[11] Esmaeili Moghadam, S., Shamsian, M., Bayat Kashkoli, A., and Kord, B., 2015. Evaluation of effect of Nano SiO2 on the physical, mechanical and morphological properties of hybrid Nano composite from polypropylene-wood flour,” In Persian, Iranian Journal of Wood and Paper Science Research, Vol. 30, No. 2, pp. 266-277, 2015.
[12] Wu, Q., Lei, Y., Clemons, C. M., Yao, F., Xu, Y., and Lian, K., “Properties of Nano composites, Journal of Plastic HDPE/ Ciay/ Wood Technology, Vol. 27, No. 2, pp. 108- 155, 2007.
[13] Amini, A., Farsi, M., Kiaei, M., and Maashi Sani, F. H., “Investigation on the Possibility of Modification of Physical and Mechanical Properties of Wood-Plastic Nano composites by Microwave Radiation,” In Persian, Iranian Journal of Wood and Paper Industries, Vol. 13, No. 3, pp. 261-273, 2022.
[14] Han, G., Lei, Y., Wu, Q., Kojima, Y., and Suzuki, S., “Bamboo- filled high den sity polyethylene composites: effect of coupling treatment and Nano clay,” Journal of Pol ymer Environment, Vol. 16, No. 2, pp. 123- 130, 2008.
[15] Maldas, D., and Kokta. B.r., “Improving Adhesion of wood fiber with polystyrene by the chemical Treatment of fiber with a coupling Agent and the Influence on the Mechanical properties of composites,” J. Adhes. Sci. Technol, Vol. 3, No. 7, pp. 529- 539, 1989.
[16] Rahmati, M., and Farajpour Roudsari, A., “Physical and mechanical properties of nano composites obtained by mixing Lanjan rice husk flour, corn starch and nanoclay biopolymer,” In Persian, biannual journal of research on renewable natural resources, Vol. 10, No. 1, pp. 39-52, 2019.
[17] Asif, A., Roa, L.V., and Ninan, K.N., “Hydroxyl terminated poly (ether ether keton) with pendant methyl group- toughened epoxy ternary nano composites: preparation, morph ology and thermomechanical properties,” Journal Applied polymer science, Vol. 106, No. 5, pp. 3793- 3799, 2007.
[18] Moradi Dehaghi, Sh., Kamali, H., Sooreh, M. R., Sadeghzadeh, H., Shababi, A. d., and Dolo, M., “The effect of adding PP fibers and nanosilica particles on the mechanical properties of epoxy composites,” In Persian, Pik Nur Alam, Vol. 2, No. 1, pp. 60-68, 2011.
[19] Deka, B. K., Maji, T. K., “Effect of Sio2 and nanoclay on the properties of wood polymer Nano composite,” Polym. Bull, Vol. 70, No. 2, pp. 403-417, 2012.
[20] Nourbakhsh, A. V., Kokta, B., ashore, A., and Jahan- Latibari, A., “Effect of a Novel Co upling Agent, Polybutadiene Isocyanate, on Mechanical Properties of wood- Fiber Polyp ropylene Composites,” Journal of REINFORCED PLASTICS AND COMPOSITES, Vol. 27, No. 10, pp. 1679- 1687, 2008.
[21] Zhang, Z. X., Gao, C., Xin, Z.X., and Kim, J. K., “Effects of extruder parameters and silica on physico-mechanical and foaming properties of PP/wood-fiber composites,” journal homepage, Vol. 43, No. 2, pp. 2047-2057, 2012.
[22] Kord, B., Hemmasi, A. H., and Ghasemi, I., “Properties of PP/ wood flour/ organomod ified montmorillonite nano composites,” Ournal of the International Academy of Wood Sci ence, 45(1), pp. 111- 119, 2010.
[23] Ziaei Tabari, h., Nourbakhsh, A., and Ashore, A., “Effects of nanoclay and coupling agent on the physic- mechanical, Mechanical, Morphological, and thermal properties of Wood flour/ polypropylene composites,” J. poly. Engin. Sci. Vol. 51, No. 2, pp. 272- 277, 2011.
[24] Xanthos, M., “Functional fillers for plantics. Wiley,” Weinheim, 488, 2005.
[25] Hosseinzadeh, S., Ghorbani, M., and Biprva, P., “Effect of colloidal silica nanoparticles produced from rice husk on dimensional stability and water absorption of poplar wood (Populus deltoides),” In Persian, Iranian Journal of Wood and Paper Science Research, Vol. 28, No. 4, pp. 773-763, 2013.
[26] Rashno, A., Sepidehdam, M.J., Ahmadi, S., Jahan-Latibari, A. and Mohebi, R., 2012. Studies of the effect of isocyanate coupling agent on physical and mechanical properties of HDPE-old cartoon fiber composite,” In Persian, Journal of Applied Researches in Chemistry( JARC), Vol. 6, No. 2, pp. 15-21, 2012.
[27] Tarmian, A., and Doosthoseini, K., “An Investigation of Practical Properties of Particleboard Produced with Methylene Diphenyl Diisocyanate (MDI),” In Persian, Iranian J. Natural Res, Vol. 58, No. 3, pp. 671-678, 2005.
[28] Adhkary, K.B., Pang, S., and Staiger, M.P., “Long- term Moisture Absorption and Thickness Swelling Behavior of Recyclyd Thermoplastics Reinforced with Pinus radiate sawdust,” Journal of Chemical Engineering, Vol. 142, No. 2, pp. 190- 198, 2008.
[29] Samariha, A., “Investigating the effect of nano silica and aluminum hydroxide on thermal properties and morphology of nanostructures obtained from waste polyethylene and OCC pulp,” The third international research conference in science and nanotechnology, University of Tehran, April, 1- 7, 2023.
[30] Reusch, W., “Virtual Textbook of Organic Chemistry,” Libre Texts, 686, 2016.
[31] Esmaeeli Aliabadi, A. R., Honarkar, H., Dashtian Gerami, N., and Moosavi Nadoshan S. A., “Synthesis and Investigation of Mechanical Properties of the Castable Elastomeric Polyurea for Anti-explosive Applications,” In Persian, Scientific and research magazine of modern defense sciences and technologies, Vol. 9, No. 4, pp. 475-467, 2018.
[32] Klyosov, A.A., “Wood Plastic Composites,” John Wiley and Sons, New Jersey.192-193, 2007.
