[1] Kieback, B. Neubrand, A. and Riedel, H., "Processing Techniques For Functionally Graded Materials" Materials Science and Engineering, Vol. 362, No. 1, pp. 81-106, 2003.
[2] Sobczak, J. and Ludmil, D., "Metallic Functionally Graded Materials: A Specific Class of Advanced Composites" Journal of Materials Science & Technology, Vol. 29, No. 4, pp. 297-316, 2013.
[3] Di Maggio, R. et al., "The Microstructure and Mechanical Properties of Fe–Cu Materials Fabricated by Pressure-Less-Shaping of Nanocrystalline Powders" Journal of Materials Science, Vol. 42, No. 22, pp. 9284-9292, 2007.
[4] Watanabe, Y. et al., "Fabrication of Fiber-Reinforced Functionally Graded Materials by a Centrifugal in Situ Method from Al–Cu–Fe Ternary Alloy" Composites Part A: Applied Science and Manufacturing, Vol 37, No .12, pp. 2186-2193, 2006.
[5] Yadroitsev, I. et al., "Application of Laser Assisted Technologies for Fabrication of Functionally Graded Coatings and Objects for the International Thermonuclear Experimental Reactor components" Journal of Nuclear Materials, Vol. 362, No. 2, pp. 189-196, 2007.
[6] Kawasaki, A. and Ryuzo, W., "Concept and P/M Fabrication of Functionally Gradient Materials", Ceramics International Journal, Vol. 23, No. 1, pp. 73-83, 1997.
[7] Ogel, B. and R. Gurbuz., "Microstructural Characterization and Tensile properties of Hot Pressed Al–SiC Composites Prepared from Pure Al and Cu Powders" Materials Science and Engineering, Vol. 301, No. 2, pp. 213-220, 2001.
[8] Zhu, J. et al., "Fabrication of ZrO 2–NiCr Functionally Graded Material by Powder Metallurgy" Materials Chemistry and Physics, Vol. 68, No. 1, pp. 130-135, 2001.
[9] Jin, G. et al., "Properties of Multilayered Mullite/Mo Functionally Graded Materials Fabricated by Powder Metallurgy Processing" Materials Chemistry and Physics, Vol. 89, No. 2, pp. 238-243, 2005.
[10] Syed, W. et al., "Single-step Laser Deposition of Functionally Graded Coating by Dual ‘wire–powder’or ‘powder–powder’feeding—A Comparative Study", Applied Surface Science Vol. 253, No. 19, pp. 7926-7931, 2007.
[11] Gelbstein, Y. Dashevsky, Z. and Dariel, M. P., "Powder Metallurgical Processing of Functionally Graded p-Pb 1− xSnxTe Materials for Thermoelectric Applications" Physica B: Condensed Matter, Vol. 391, No. 2, pp. 256-265, 2007.
[12] Nemat-Alla, M. M. et al., "Powder Metallurgical Fabrication and Microstructural Investigations of Aluminum/Steel Functionally Graded Material" Materials Sciences and Applications, Vol. 2, No. 12, pp. 1708, 2011.
[13] Cavdar, U. et al., "Effect of the Copper Amount in Iron-based Powder-metal Compacts." Materiali in tehnologije, Vol. 48, No. 6, pp. 977-982, 2014.
[14] Jeong, J. S. and Ki-Hoon, Sh., "Property Estimation of Functionally Graded Materials Between M2 Tool Steel and Cu Fabricated by Powder Metallurgy" Transactions of the Korean Society of Mechanical Engineers, Vol. 38, No. 9, pp. 953-958, 2014.
[15] Dandan, Q. et al., "Characterization of W/Fe Functionally Graded Materials Manufactured by Resistance Sintering Under Ultra-High Pressure" Fusion Engineering and Design, Vol. 91, pp. 21-24, 2015.
[16] Erdemir, F. A. Canakci, and T. Varol., "Microstructural Characterization and Mechanical Properties of Functionally Graded Al2024/SiC Composites Prepared by Powder Metallurgy Techniques" Transactions of Nonferrous Metals Society of China, Vol 25, No. 11, pp. 3569-3577, 2015.
[17] Eisen, W. B. et al., "ASM Handbook Volume 07: Powder Metal Technologies and Applications" ASM International, USA, Vol. 82, pp. 111-122, 1998.
[18] ASTM Standard B925- 03, “Standard Practices for Production and Preparation of Powder Metallurgy (PM) Test Specimens ", ASTM International, West Conshohocken, PA, DOI: 10.1520/B0925-15, 2015.
[19] Zhao, P. et al., "Fabrication of W–Cu Functionally Graded Material with Improved Mechanical Strength" Journal of Alloys and Compounds. Vol. 601, pp. 289-292, 2014.
[20] Delfosse, D. Cherradi, N. and Ilschner, B., "Influence of Residual Stresses on the Tensile Behavior of a Cu-Ni FGM" International Symposium of Structure Functinally Graded Materaterials, Vol. 3, 1995.