@article { author = {Fouladi, Ali and SARAEI, ALIREZA and KIANI, ALI}, title = {Prediction and control of the mechanical properties of braided composite by controlling the braid angle using the micro-mechanical relationships for each of the flat faces of mandrel}, journal = {Journal of Science and Technology of Composites}, volume = {5}, number = {4}, pages = {595-604}, year = {2019}, publisher = {Iran University of Science and Technology}, issn = {2383-3823}, eissn = {}, doi = {}, abstract = {Textile composites, in which a textile preform is used as the reinforcement phase, can easily take the form of complex parts and possess a more efficient and reliable structure, hence, they are a suitable substitute for conventional laminates. Among the textile composites, braided composites are of great importance and they are used more extensively, one of the important factors in mechanical properties of final composite part is the braid angle. In this paper, at first, a brief explanation of the new analytical relationships is presented. Also, a new strategy for changing and controlling the braid angle on each face of the flat mandrel by changing the shape of the guide ring from circle to an ellipse and also controlling the eccentricity is discussed which was previously developed by the authors. Then a comprehensive program is presented which predicts the mechanical properties of the final composite considering the braid angles. To validate the results, they are compared with the results of previous studies. After investigations, it was determined that the results of the developed program and micromechanical relationships show very good consistency in predicting the properties of the final composite. Therefore, it is possible to control the mechanical properties on any of the mandrel's faces by changing the mentioned parameters.}, keywords = {Composites made with tubular braiding,braid angle,Eccentricity,guide ring shape,Micromechanical analysis}, title_fa = {پیش‌بینی و کنترل خواص مکانیکی کامپوزیت برید شده از طریق کنترل زاویه برید با استفاده از روابط میکرومکانیک برای تک تک وجوه مقاطع تخت}, abstract_fa = {کامپوزیت‌های نساجی که از پیش‌شکل‌یافتهی نساجی به عنوان تقویت‌کننده استفاده می‌کنند، به دلیل سهولت تولید قطعات با اشکال خاص و ساختاری کارآمدتر و قابل‌اعتمادتر، به‌عنوان جایگزین مناسب برای چندلایه‌های متداول هستند. در میان انواع کامپوزیت‌های نساجی، کامپوزیت‌هایی با فاز تقویت‌کننده برید شده از اهمیت ویژه و کاربرد گسترده‌تری برخوردار است. در فرآیند بریدینگ یکی از مهم‌ترین مؤلفه‌ها در خواص مکانیکی کامپوزیت نهایی زاویه برید است. در این مقاله ابتدا به توضیح مختصر روابط تحلیلی جدید و راهکاری جدید جهت تغییر و کنترل زاویه برید بر روی تک‌تک وجوه یک مغزی تخت به کمک تغییر شکل حلقه‌ی راهنما از دایره‌ای به بیضی و کنترل خروج از مرکزی که قبلا توسط نویسندگان توسعه داده شده پرداخته شده است. سپس به ارایه برنامه‌ی کاملی پرداخته شده است که خواص مکانیکی کامپوزیت نهایی را بر اساس زوایای برید پیش‌بینی می‌کند برای صحت‌بخشی به نتایج حاصله به مقایسه نتایج حاصله با تحقیقات گذشته جهت بررسی صحت نتایج صورت پذیرفته است پس از بررسی‌های انجام‌شده مشخص گردید که نتایج حاصل از برنامه مورد نگارش و روابط میکرومکانیک جهت پیش‌بینی خواص کامپوزیت نهایی از صحت بسیارخوبی برخوردار است. بنابراین می‌توان به کنترل خواص مکانیکی بر روی هر یک از وجوه مغزی به کمک تغییر پارامترهای بیان شده دست یافت.}, keywords_fa = {کامپوزیت ساخته شده با بریدینگ مدور,زاویه برید,خروج از مرکزی,شکل حلقه‌ی راهنما,تحلیل میکرومکانیک}, url = {https://jstc.iust.ac.ir/article_32818.html}, eprint = {https://jstc.iust.ac.ir/article_32818_5b0793dc60b8e0598d6bf1cf3cd7867b.pdf} }