@article { author = {Aghamohammadi, Hamed and Abbandanak, S. Navid Hosseini and Eslami-Farsani, Reza and Siadati, S. M. Hossein}, title = {Effect of various surface treatment methods on the flexural properties of fiber metal laminates}, journal = {Journal of Science and Technology of Composites}, volume = {6}, number = {4}, pages = {495-502}, year = {2020}, publisher = {Iran University of Science and Technology}, issn = {2383-3823}, eissn = {}, doi = {10.22068/jstc.2020.31524}, abstract = {Fiber metal laminates (FMLs) are a new group of composite materials that consist of alternating thin laminates of metals and fiber reinforced polymeric composites. FMLs combine the advantages of metals and polymeric composites. In order to enhance the interfacial bonding between the alternating laminates, various surface treatment methods can be used on the metal surfaces. In this research, FMLs of alternating laminates of aluminum/epoxy-basalt fibers were fabricated using hand lay-up method. The effect of various surface treatment methods of mechanical and chemical (consist of alkaline and sulfochromic etching) on the flexural properties of the fabricated FMLs were investigated with three-point bend tests. SEM were utilized to investigate surface morphology of aluminum. Results showed that the sulfochromic etch method brought about a significant improvement in the flexural strength, strain to failure and absorbed energy in comparison to the mechanical and alkaline methods. Difference in flexural behavior of samples is attributed to their aluminum surface morphology. SEM observations showed that sulfochromic etch method created a porous layer on the aluminum surfaces. This porous layer provided channels for the epoxy resin to fill in, creating better adhesion and a much stronger mechanical interlocking between the laminates.}, keywords = {Fiber metal laminates,Basalt fibers,Surface treatment,Flexural properties}, title_fa = {اثر روش های مختلف آماده سازی سطحی بر خواص خمشی کامپوزیت های الیاف/فلز}, abstract_fa = {کامپوزیت های الیاف/ فلز گروه جدیدی از مواد کامپوزیتی هیبریدی هستند که از ورق های فلزی و لایه های پلیمری تقویت شده با الیاف تشکیل شده اند. استفاده از کامپوزیت های الیاف/ فلز موجب بهره وری از ترکیب مزایای فلزات و کامپوزیت های پلیمری می شود. به منظور بهبود چسبندگی بین لایه های فلزی و کامپوزیتی، از روش های مختلف آماده سازی سطحی بر روی سطح فلز استفاده می شود. در این تحقیق، کامپوزیت‌های آلومینیوم/ اپوکسی- الیاف بازالت با روش لایه گذاری دستی ساخته شد و اثر روش های مختلف آماده سازی سطحی مکانیکی و شیمیایی (شامل فرآیند قلیایی و حکاکی با محلول سولفوکرومیک) بر خواص خمشی آن ها با استفاده از آزمون خمش سه نقطه ای مورد بررسی قرار گرفت. از میکروسکوپ الکترونی روبشی به منظور بررسی مورفولوژی سطحی آلومینیوم استفاده شد. نتایج نشان داد که استفاده از روش آماده سازی حکاکی با محلول سولفوکرومیک موجب بهبود قابل توجهی در مقادیر استحکام خمشی، کرنش شکست و انرژی جذب شده در مقایسه با روش های مکانیکی و قلیایی می شود. تفاوت در رفتار خمشی نمونه ها مرتبط با مورفولوژی سطحی لایه آلومینیوم آن ها می باشد. مشاهدات میکروسکوپ الکترونی روبشی نشان دهنده این است که روش آماده سازی حکاکی با محلول سولفوکرومیک موجب ایجاد یک ساختار متخلخل بر روی سطح آلومینیوم می شود. این لایه متخلخل با ایجاد مکان هایی برای پر شدن توسط رزین اپوکسی، چسبندگی بهتر و قفل مکانیکی قوی تر بین لایه ها را به همراه دارد.}, keywords_fa = {کامپوزیت الیاف/ فلز,الیاف بازالت,عملیات سطحی,خواص خمشی}, url = {https://jstc.iust.ac.ir/article_31524.html}, eprint = {https://jstc.iust.ac.ir/article_31524_f9f7718710467775fc34c20789a24712.pdf} }