@article { author = {Ashofteh, Roya Sadat and Pourang, Hassan and Mobasheri, Mersad and Khoramishad, Hadi}, title = {The Effects of Temperature Level and Stress-to-Strength Ratio on Creep Behavior of Aluminum-Aluminum Single Lap Adhesive Joints}, journal = {Journal of Science and Technology of Composites}, volume = {5}, number = {3}, pages = {353-358}, year = {2018}, publisher = {Iran University of Science and Technology}, issn = {2383-3823}, eissn = {}, doi = {}, abstract = {Polymer-based adhesives undergo creep deformation under constant loading due to their viscoelastic nature. The aim of this study was investigation of the effects of temperature level and stress- to-strength ratio on creep behavior of single lap joints (SLJs) manufactured with adhesive Araldite 2011. Static tensile tests were done on the samples at 40 and 50°C. Then, the tensile creep tests were done at 40 and 50°C and at stress-to-strength ratios of 0.25 and 0.35. With increasing the stress-to-strength ratio from 0.25 to 0.35 at 40°C, the creep displacement and the slope of the second creep stage were increased by 24% and 96.7%, while at 50°C such increase reached to 14.3% and 79.9%, respectively. With increasing the temperature from 40 to 50°C, at the stress-to-strength ratio of 0.25, the creep displacement was increased by 20.6% and the slope of second creep stage increased by 49.5%. Whereas, at the stress-to-strength ratio of 0.35, changing the temperature from 40 to 50°C resulted an increase in the creep displacement by 11.1% and the slope of second creep stage by 36.6%.}, keywords = {Adhesive,Creep,Shear strength,Single Lap Joint}, title_fa = {اثرات سطح دما و نسبت تنش به استحکام بر رفتار خزشی اتصالات چسبی تک لبه آلومینیوم-آلومینیوم}, abstract_fa = {چسب‌های پلیمری به سبب ماهیت ویسکوالاستیک خود با گذر زمان و تحت یک بار ثابت دچار تغییر شکل‌ خزشی می‌شوند. هدف از انجام این تحقیق بررسی تأثیر سطح دما و نسبت تنش- به- استحکام بر رفتار خزشی اتصالات چسبی ساده تکه لبه ساخته‌شده با چسب آرالدایت 2011 است. ابتدا آزمایش کشش استاتیکی در دمای 40 و 50 درجه سانتی‌گراد صورت گرفته و سپس با اعمال نسبت‌های تنش- به- استحکام نهایی معادل 25/0 و 35/0، آزمایش خزش کششی انجام گرفته است. با افزایش نسبت تنش- به- استحکام نهایی از 25/0 و 35/0 در دمای 40 درجه سانتی‌گراد، جابجایی خزشی و شیب حالت پایدار خزش به‌ترتیب 24 و 7/96 درصد افزایش پیدا می‌کنند. در دمای 50 درجه این میزان افزایش برابر 3/14 و 9/79 درصد است. همچنین با افزایش دما از 40 به 50 درجه سانتی‌گراد، جابجایی خزشی و شیب حالت پایدار خزش در نسبت تنش- به- استحکام نهایی معادل 25/0، به‫ترتیب 6/20 و 5/49 درصد و در نسبت تنش- به- استحکام نهایی معادل 35/0، به‌ترتیب 1/11 و 6/36 درصد افزایش پیدا می-کنند. ‬‬}, keywords_fa = {چسب,خزش,استحکام برشی,اتصال چسبی تک لبه‌}, url = {https://jstc.iust.ac.ir/article_30904.html}, eprint = {https://jstc.iust.ac.ir/article_30904_952e483b8cb84cefcd79b53c426ab828.pdf} }