@article { author = {Davar1, Ali and Azarafza2, Reza and Bagheri, Vahid}, title = {Experimental and numerical analysis of composite lattice truncated conical structures with and without carbon nanotube reinforcements under axial compressive force}, journal = {Journal of Science and Technology of Composites}, volume = {4}, number = {4}, pages = {418-425}, year = {2018}, publisher = {Iran University of Science and Technology}, issn = {2383-3823}, eissn = {}, doi = {10.22068/jstc.2018.26375}, abstract = {In the present paper the compressive behavior of composite lattice truncated cone reinforced with and without carbon nanotube (CNT) is investigated using experimental and numerical simulation methods. Composite lattice truncated cone samples, made of glass/epoxy without CNT and reinforced with 2% wt. CNT are fabricated using filament winding process and tested under compressive axial force. Moreover, modeling of the structure is performed and numerical simulation is achieved using commercial finite element ABAQUS software and the results of compressive force vs. axial displacement are verified by the experimental data and good agreement is observed. Halpin-Tsai micromechanics model is also utilized in order to calculate the nanocomposite material properties and assigned in the numerical simulation. The effects of CNT weight percentage and coefficients of CNT dispersion within the epoxy resin matrix are investigated using numerical simulation method. The results showed that addition of CNT by 2% wt. to the epoxy resin of the composite lattice conical structure, enhanced the maximum carried compressive force by 44%. While addition of CNT more than 2% wt. causes the compressive strength to be decreased due to less dispersion quality and agglomeration and non-uniform dispersion of the CNTs within the epoxy resin.}, keywords = {Lattice truncated cone,glass/epoxy,Nanocomposite,Axial compression test,numerical simulation}, title_fa = {تحلیل تجربی و عددی سازه های مخروط ناقص مشبک کامپوزیتی تقویت شده با و بدون نانولوله های کربنی تحت نیروی محوری فشاری}, abstract_fa = {در این مقاله رفتار فشاری سازه‌های مخروط ناقص مشبک کامپوزیتی با و بدون نانولوله‌ کربنی به عنوان تقویت کننده، به روش تجربی و شبیه‌سازی عددی مورد بررسی قرار گرفت. نمونه‌های کامپوزیتی از جنس شیشه/اپوکسی بدون نانولوله کربنی و تقویت شده با 2% وزنی نانولوله کربنی به روش پیچش الیاف ساخته شد و مورد آزمایش نیروی محوری فشاری قرار گرفت. همچنین مدلسازی مخروط ناقص مشبک کامپوزیتی و شبیه‌سازی عددی در نرم افزار آباکوس انجام پذیرفت و نتایج نیروی فشاری-جابجایی محوری با نتایج آزمایشگاهی مقایسه گردید و تطابق خوبی حاصل شد. در شبیه‌سازی عددی، برای اختصاص دادن خواص ماده نانوکامپوزیت، از مدل هالپین-سای اصلاح شده استفاده شد. تاثیر کسر حجمی نانولوله کربنی و همچنین ضرایب پراکندگی نانولوله‌ها در داخل رزین اپوکسی، به کمک تحلیل اجزاء محدود بررسی شد. نتایج نشان داد که افزودن 2% وزنی نانولوله کربنی به رزین اپوکسی در حین ساخت، نیروی قابل تحمل بیشینه را حدود 44% افزایش می‌دهد. این در حالی است که با افزایش کسر حجمی نانولوله بالاتر از 2% وزنی، به دلیل کاهش کیفیت پراکندگی و کلوخه‌ای شدن و غیر یکنواختی توزیع نانولوله درون رزین اپوکسی، حداکثر نیروی قابل تحمل سازه کاهش می‌یابد.}, keywords_fa = {مخروط ناقص مشبک,شیشه/اپوکسی,نانوکامپوزیت,آزمایش فشار محوری,شبیه سازی عددی}, url = {https://jstc.iust.ac.ir/article_26375.html}, eprint = {https://jstc.iust.ac.ir/article_26375_136b6b844bc6f7e3a4b9368a0e76a00f.pdf} }