روشهای ارتعاشی از جمله روشهای مرسوم عیبیابی غیرمخرب برای شناسایی پارامترهای عیب است. یکی از مهمترین مشکلات استفاده از روشهای عیبیابی ارتعاشی، حساسیت پایین آنها در حضور نویز میباشد. در کار حاضر روش عیبیابی هیبریدی برای افزایش پایداری نسبت به نویز ارائه شده است. بدین صورت که ابتدا ناحیه اولیه عیب توسط تبدیل ویولت شناسایی شده و سپس با استفاده از روش بروزرسانی مدل المان محدود مبتنی بر الگوریتم ژنتیک، پارامترهای کمی عیب شناسایی میشوند. از سیگنال نسبت انرزی کرنشی در دو حالت سالم و معیوب برای شناسایی اولیه و تقریبی محل عیب توسط تبدیل ویولت و از سیگنال اختلاف انرژی کرنشی بهعنوان تابع خطا در فرآیند بروزرسانی استفاده شده است. با استفاده از این روش علاوه بر افزایش میزان پایداری نسبت به نویز، حجم محاسبات بهمیزان چشمگیری کاهش مییابد. در این فعالیت به مقایسه پایداری نسبت به نویز در دو روش بروزرسانی کلاسیک و روش هیبریدی مبتنی بر ویولت و بروزرسانی پرداخته شده است. نمونه مورد بررسی مدل المان محدود صفحه کامپوزیتی چند لایه با عیب تورق میباشد.
Vibrational methods is one of the common nondestructive damage detection methods for detecting the damage parameters. The most important problem of these methods is their low sensitivity to detect the damage in the presence of noise. In this article, a hybrid damage detection method has been studied to increase the robustness of vibrational method to noise. First, the primary damage location has been detected by the wavelet transform. Next, all the damage parameters including location, depth and intensity of damage have been identified by the model updating process based on the Genetic Algorithm. The signal based on the strain energy ratio in intact and damaged states has been examined to primarily and approximately detect the location of damage thought applying wavelet transform. Also the selected error function in the updating process is based on the strain energy difference between these two states. Using the proposed method leads to raise level of robustness in the presence of noise, also the solution performs faster than the prior methods with the less computational cost. In this work, the solution robustness against noise in traditional model updating method and the proposed hybrid method based on the wavelet transform and updating process has been compared together. The case study has been the laminated composite plate with the delamination damage